Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 11.04.2026
Report code: 1775910539
Philips Respironics EverFlo OPI Oxygen Concentrator Analysis Report
Device Identification and Basic Information
The product shown in the images is an oxygen concentrator used to provide oxygen support for respiratory conditions. Upon examining the text on the front upper panel of the device and its original box in the background, it has been definitively identified as a Philips Respironics brand, EverFlo OPI model.
Usage Areas
This device is designed to deliver high-purity oxygen to the patient by separating oxygen from ambient air. It is used in the treatment of COPD, asthma, heart failure, or other respiratory diseases where blood oxygen levels are low. It is suitable for use by both adult and pediatric patients in home care processes and clinical environments.
Quantity Information
The images show 1 oxygen concentrator main unit, 1 power cable integrated into the device, 1 humidifier water bottle in a transparent bag in the background, and 1 original carrying box.
Physical Condition
The outer casing of the device is made of light blue hard plastic. A visual inspection of the casing revealed no cracks, breaks, deep scratches, dents, or discoloration. The device appears clean and well-maintained in general terms.
Mechanical and Electronic Components
The status of the mechanical and electronic components located on the front panel and body of the device is listed below.
- Flowmeter There is a transparent tube-shaped flowmeter in the front middle section of the device. The scale on it indicates between 1 and 5 LPM (Liters/Minute). The black adjustment knob at the top of the tube is intact, and there are no cracks in the glass of the tube.
- Power Switch The black on/off (I/O) switch located on the top panel is physically intact.
- Indicator Panel There are three LED notification lights (power, alarm, and service/wrench symbols) to the left of the power switch. There is no physical deformation on the panel.
- Oxygen Outlet Port The metal oxygen outlet tip (cannula connection point) located in the upper left corner of the device is intact and not bent.
- Carrying Handle and Wheels The carrying slot integrated into the top of the casing is undamaged. There are wheels at the bottom of the device to facilitate movement on the floor.
Accessories and Connections
The black power cable, which is wrapped around the top of the device, is integrated into the unit. The end of the cable features a standard European type (Type F) grounded plug. No crushing, tearing, or exposed wires were observed in the outer insulation of the cable. Behind the device, a humidifier water bottle used in oxygen therapy is partially visible inside a transparent nylon bag.
Information on the Box and Packaging
In the second image, the original cardboard box of the device was examined in detail. The blue PHILIPS RESPIRONICS logo is present on the box. Below the logo, international standard symbols and technical values indicating transport and storage conditions are printed.
- Directional Arrows There are two upward-pointing arrow symbols indicating that the box must be transported upright.
- Fragile Item The product is indicated as fragile with a wine glass symbol.
- Protection from Moisture It is emphasized that the product must not get wet with an umbrella and raindrop symbol.
- Temperature Limits Next to the thermometer symbol, it is stated that the storage temperature should be between -34°C and +71°C (-30°F and +160°F).
- Humidity Limits It is stated with a percentage (%) symbol that the ambient humidity should be between 15% and 95%.
Authenticity Assessment
The brand imprints on the device casing, the model text (EverFlo OPI), the embossed logo area at the bottom, and the print quality of the original cardboard box in the background are consistent with each other. The visual evidence supports that the product is an original Philips Respironics device.
Potential Failure Risk
The examination conducted via the images revealed no impact marks on the casing, wear on the power cable, or breakage in the mechanical parts (flowmeter, buttons, oxygen outlet). In terms of its external condition, the device is in good shape and does not visually present any significant risk of failure.
