Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 19.01.2026
EVERFLO OPI Oxygen Concentrator Analysis Report
Device Identification and Description
The device shown in the visuals is a stationary type oxygen concentrator used for medical purposes, which separates air to provide high-concentration oxygen to the patient. The product belongs to the standard home-use medical device class and is a ready-to-use set equipped with a nasal cannula (nosepiece) connection and a humidifier water reservoir.
Brand and Model Information
As a result of the analysis of the original label and type indicators on the device, the following identification information has been determined:
- Brand/Series: The phrase EverFlo | OPI is clearly visible in capital letters on the device label. (During verification, the “EverFlo” series was confirmed to belong to Philips Respironics production, but since the Philips logo could not be clearly read directly from the visual, the original phrase “EverFlo” on the label was taken as a basis).
- REF Code (Model Number): 1020006 (Stated as “REF 1020006” on the label).
Originality
The label on the product, its typography, the placement of symbols (CE logo, ETL approval, IP class), and the molding quality of the device (blue plastic casing and control panel details) indicate original factory production. The serial number and barcode system on the label comply with professional medical device standards.
Areas of Use
The EverFlo oxygen concentrator is used to provide long-term oxygen therapy, especially for patients experiencing respiratory failure, in home environments or clinics. It is suitable for the following conditions:
- Oxygen support for patients with COPD (Chronic Obstructive Pulmonary Disease).
- Supportive treatment for lung infections or reduced respiratory capacity.
- Patients requiring continuous oxygen as part of home care services.
- The device takes ambient air and filters out nitrogen, providing oxygen with 90-96% purity to the patient; unlike cylinder oxygen, it does not require continuous refilling and operates electrically.
Quantity Information
A total of the following parts are present in the visuals:
- 1 EverFlo Oxygen Concentrator Main Unit
- 1 Humidifier Water Container (with blue cap)
- 1 Power Cable (wrapped with a Velcro strap on the upper rear part of the device)
- 1 Set of Connection Hose and Nasal Cannula
General Condition and State
The device is in used (second-hand) condition. Significant signs of use are visible on its upper panel, recesses, and accessories. It is not a new or boxed product; it appears to have been taken out of active use.
Physical Deformation
- Casing: No major crack or break has been detected on the blue plastic outer casing. However, accumulated dust and dirt are present in the upper recesses.
- Accessories: Yellowing is present on the transparent oxygen hoses (cannula and intermediate connection hose). This indicates that the hoses have been used for some time.
- Labels: There is no peeling at the corners or surface of the rear label; its readability is high.
Mechanical Components
The mechanical exterior parts of the device appear solid. The on/off switch (I/0) on the front panel is in place and intact. The black flowmeter knob that adjusts the flow rate is robust. The Velcro strap holding the humidifier bottle retains its function. The clamp mechanism holding the power cable at the rear is also intact.
Electronic Components
It is not possible to examine the internal electronic circuits via the visual. However, the visible “Power Cable” and “On/Off Switch” physically retain their integrity. The lenses of the LED indicators (likely green, yellow, red) on the control panel are clean and unbroken.
Accessories and Hygiene
- Humidifier Bottle: The standard bottle with a blue cap is on the device. For hygiene reasons, it is strongly recommended to replace this bottle and especially the yellowed oxygen cannula (hose) before transferring to a new user.
- Power Cable: The black power cable is present and coiled at the back of the device; it is not missing.
Label and Technical Data Analysis
The critical technical information read from the label on the back of the device is as follows:
- Serial Number (SN): 0336007
- GTIN Code: (01)00606959032552
- Operating Voltage: 230V ~ 50 Hz (Suitable for Turkey’s mains electricity)
- Current: 1.5 Ampere
- Oxygen Output: Max O2: 96% (Maximum 96% purity)
- Weight: 14-15 kg
- Protection Class (IP): IP21 (Protected against vertically dripping water)
- Warning Signs: “No Smoking” (Flammable oxygen warning), “Keep away from fire”, “Do not use Oil/Grease”, “Do not dispose (Recycle)”.
Potential Malfunction Risk
There is no evidence in the visuals indicating that the device is “malfunctioning” (such as a red warning light illuminated or a broken part). However, the yellowing of the hoses indicates that the device has been in active use for a certain period. Oxygen concentrators have a specific lifespan for their internal filters (zeolite sieves). Although no serious risk is apparent from the outside, consumables (hoses and filters) may need to be replaced.
