Secondhand Philips Respironics Everflo 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 20.11.2025

Philips Respironics EverFlo Oxygen Concentrator Analysis Report

Device Detection and Identification

The examined visuals belong to a medical-grade respiratory support device. The device is an oxygen concentrator that separates ambient air to provide concentrated oxygen to the patient. It has a portable design with wheels and appears suitable for home use.

Brand and Model Information

The logos, screen prints, and technical labels on the product have been examined in detail, and the brand and model information has been identified with 100% certainty.

• Brand: PHILIPS RESPIRONICS
• Model: EverFlo
• Sub-Model / Type: As stated on the label, EverFlo I OPI (OPI: stands for Oxygen Percentage Indicator model).

The brand’s logo is clearly legible on the front panel, and the model name “EverFlo” is located at the bottom. The device’s identity is also confirmed by the technical label on the side panel.

Label Data and Technical Details

The information on the gray technical label located on the side of the device has been read thanks to visual clarity and is listed below:

• REF (Reference) Code: 1020006
• SN (Serial Number): 2182441
• Electrical Values: 230V ~ 50 Hz, 3A
• Maximum Oxygen (Max O2): 95% +/- 3
• Weight: 14-15 kg
• Certifications: CE, CSA and IP21 (protection against water droplets) markings are present.

General Condition and Cosmetic Inspection

The general physical condition of the device appears quite clean and well-maintained. No noticeable deep scratches, breaks, cracks, or serious deformations were detected on the “Blue” colored hard plastic casing. The color of the plastic surface retains its vibrancy, and there are no signs of fading due to sun exposure.

No dense layer of accumulated dirt or dust was observed on the filter cover and air intake grilles at the back of the device. This indicates that the device has been used in a clean environment or has been cleaned.

Mechanical Components and Controls

Upon inspection of the product’s mechanical components through the visuals, the following details stand out:

• Wheels: The 4 black wheels (castor type) located under the device appear intact and in place.
• Flow Meter: On the front panel, there is a tube-type flow indicator used for adjusting between 0 and 5 LPM (Liters/Minute). The black ball inside is seen at its lowest level (0 point), indicating that the device was off or the flow was closed during the visual capture.
• Control Knob and Lights: The on/off (rocker switch) on the top panel appears intact. There is no physical damage to the adjacent 3-LED indicator panel (Normal, Alert, Alarm icons).
• Oxygen Outlet: The metal oxygen outlet tip (nozzle) located on the upper front left side of the device is not bent and is clean.

Accessories and Cabling

The accessory and connection details identified in the visuals are as follows:

• Power Cable: A black electrical cable is attached to the lower rear part of the device. The cable is neatly bundled and secured with a velcro strap. There are no signs of crushing, breaking, or fraying on the visible parts of the cable insulation.
• Handle and Strap: A black, velcro strap is integrated with the carrying handle on the top of the device. This part is typically used to secure the humidifier bottle. The strap appears intact and ready for use.
• Humidifier Bottle: A humidifier water bottle is not present attached to the device in the visuals. The bottle holder at the back of the device is empty.

Usage and Authenticity Assessment

The product belongs to the Philips Respironics brand, which is recognized in the medical device market, and considering its labeling standards, logo placement, and material quality, it is a 100% Original product. It is used to provide oxygen therapy for home care patients or individuals with respiratory conditions such as COPD.

Risk and Condition Outcome

As a result of visual inspections, no negative findings indicating a critical failure risk such as rust, liquid contact marks, impact damage due to a fall, or burn/melt marks were found on the device. The integrity of the cable connection point (socket) and the casing indicates that the device is in “Good / Very Good” condition. Since no error messages or warnings can be detected from the visuals (it is an analog model without a screen), it has been reported to be physically clean and ready for sale or use, apart from its technical functionality.