Secondhand Plusmed plusCON PM 7F-5 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 27.12.2025

plusMED plusCON (pM 7F-5) Oxygen Concentrator Analysis Report

Device Identification

The product shown in the images is an Oxygen Concentrator device that provides medical respiratory support. The device is an electrically operated, stationary medical equipment designed to take in ambient air, separate nitrogen from it, and deliver high-concentration oxygen to the user.

Brand and Model Information

Upon examining the labels and prints on the product, the brand and model information is definitive:

• Brand: plusMED (Manufacturer: Jiangsu Yuyue Medical Equipment)
• Model: plusCON
• Reference Number (REF): pM 7F-5

This information is clearly legible on both the front panel of the device and the technical label located on the back. It has been verified that the technical infrastructure of the device belongs to the known “7F-5” series (manufactured by Yuwell, distributed under the plusMED brand).

Originality and Origin

Upon examining the label on the back of the product, it is seen that the manufacturer is “JIANGSU YUYUE MEDICAL EQUIPMENT & SUPPLY CO., LTD.” and the phrase “Made in P.R.C.” (People’s Republic of China) is present. The importer in Turkey, “TRİMPEKS İTH. İHR. TUR. VE TİC. A.Ş.”, is clearly stated on the label. The quality of the label, its placement, and the logos it contains (such as the CE mark) indicate that the product is original.

Areas of Use

This device is used to provide supplementary oxygen to patients with COPD, heart failure, or other respiratory conditions where blood oxygen saturation is low. It is suitable for use in home care settings and clinics. It delivers oxygen to the patient via a nasal cannula or mask.

General Condition and Physical State

The outer casing of the device is made of hard beige plastic. Although its general condition is used, it is intact:

• Casing: No significant cracks or breaks have been observed. However, there is dust accumulation and light dirt deposits on the plastic surfaces, especially around the carrying handle and in the water bottle holder.
• Deformation: There is no major physical deformation, but normal surface dullness due to the age or use of the device and parts requiring cleaning are noticeable.
• Wheels: The wheels seen on the underside were found to be in place; there is dust accumulation on the wheels due to use.

Operating Time (Hours Information)

As a result of the analysis of the LCD screen on the front panel, the total operating hours of the device have been determined. The following value is read under the “COUNTS hours” display:

Operating Hours: 1930.8 Hours

The smaller last digit on the screen indicates a decimal fraction (minutes/tenths of an hour). For an oxygen concentrator, 1930 hours indicates that the device has been actively used but is still at the beginning/middle of its lifespan (typically 10,000+ hours).

Accessories and Mechanical Components

The accessories and mechanical parts attached to the device in the images are as follows:

• Humidifier Water Bottle: 1 unit is attached. Water droplets and fog are visible inside the bottle, indicating recent testing or use. A connecting hose is present between the bottle and the device.
• Flowmeter: A mechanical “ball type” flowmeter is located on the front panel. The black ball inside is at the “0” point (device is not running or flow is off). Numbers are legible through the transparent part.
• Switches: An On/Off (I/O) switch is present. A circuit breaker (Reset) button is visible on the panel.

Quantity Information

The images show 1 unit of the main device (oxygen concentrator) and 1 unit of an attached humidifier water bottle.

Technical Label and Certification Information

Important technical data found on the device’s rear label are as follows:

• Serial Number (S/N): YY1209347
• Input Power: 500VA
• Voltage: AC220V ±10%, 50Hz
• Certifications: CE 0123 approval, Square within a square symbol (Double insulation), Type B (part in contact with human) symbol.
• Warnings: The “No Smoking” icon is prominently displayed on both the front panel and the label.

Screen and Panel Analysis

The control panel is grey and displays the warning “ATTENTION! PLEASE READ THE MANUAL BEFORE OPERATING!”. A slight peeling or gelatin deformation is visible on the LCD screen (especially the upper left corner), but the readability of the numbers is complete. “POWER” and “I/O” LED indicators are present. In the close-up shot (image 3), the power LED is seen glowing green, indicating that the device is connected to power and active, at least in standby mode.

Potential Failure Risk and Assessment

No broken parts, corrosion, or visible damage to cables are present in the images. The fact that the screen is operational indicates that the electronic board is performing its basic function. Superficial dirt on the wheels and casing can be removed by cleaning. The device can be classified as a “used device in good condition, with cosmetic traces of use, and appearing operational”. No mechanical or serious wear and tear risk has been identified based on the visual data.