Secondhand Plusmed PM-KN01 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 17.03.2026
Report code: 1773728670

Plusmed Oxygen Concentrator Analysis Report

Device Identification and Applications

The device shown in the visuals is an oxygen concentrator manufactured for patients requiring respiratory support. The device is used to separate oxygen from ambient air and provide high-concentration oxygen to the patient. It is suitable for use in home care services and clinical environments for respiratory therapy.

Brand and Quantity Information

In the visuals, 1 oxygen concentrator of the Plusmed brand has been identified. The specific model number of the device is not visible in the visuals.

General Condition and Physical State

The device is used and its general condition is good. No breaks, cracks, dents, or discoloration have been observed on the outer casing. The bottom part of the device has four wheels to facilitate transport and appears physically sound.

Mechanical and Electronic Components

The mechanical flowmeter on the front panel of the device is intact, and its adjustment knob is in place. The upper carrying handle appears to be in good condition. The electronic components of the device are functional. The LCD screen on the top panel is active, and its blue backlight is working without issues. The power button and other control buttons are physically sound.

Screen Analysis and Usage Duration

The following data is displayed on the device’s functional LCD screen:

• S.Times: 0000310 (Indicates the number of times the device has been started)
• O.P. MPa: 0.145 (Operating pressure value)
• O.Time: 0000:01 (Duration of the current usage session)
• Acc.Time: 0000172 (Total accumulated operating time of the device. It is understood that the device has been used for a total of 172 hours)

Among the status indicator LEDs located directly below the screen, the P.O. light is observed to be illuminated in green. This indicates that the device is receiving power and is turned on.

Technical Specifications and Label Information

The front body of the device contains warning texts in both Turkish and English. The technical data and warnings obtained from these texts are as follows:

• Oxygen concentration capacity is stated as 93%±3.
• According to the scale on the mechanical flowmeter, the device has an oxygen flow capacity between 0 and 5 L/min (Liters per minute).
• A warning is present stating that the dust filter should be cleaned monthly, and the air inlet filter should be replaced monthly.
• It is emphasized that smoking, open flames, and the use of oil or grease are prohibited in the vicinity.

Accessories and Missing Parts

On the front left side of the device, there is a slot for the humidifier water bottle (biberon) and a black fastening strap. However, the humidifier water bottle is not present in the visuals. The oxygen outlet port (metal tip) is intact. Consumables such as nasal cannulas or masks for the patient are not visible in the visuals.

Originality and Potential Risks

The device’s casing structure, screen interface, print quality, and labels comply with standard medical device norms, indicating original manufacturing. No breaks, rust, or error codes on the screen that would impede the device’s operation have been detected in the visuals. The device’s condition is good, and based on the visual data, no significant risk of malfunction has been observed.