Secondhand Respirox JLO-590i 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 22.08.2025

Respirox 5 lt Oxygen Concentrator Analysis Report

Product Overview

The device shown in the visuals is a Respirox brand oxygen concentrator. On the front of the device, there is the phrase “OXYGEN CONCENTRATOR” and the “Respirox” brand logo, along with the inscription “5 lt”. This inscription indicates that the device has an oxygen production capacity of 5 liters per minute. Oxygen concentrators are medical devices that separate oxygen from ambient air, producing concentrated pure oxygen, and deliver it to patients requiring respiratory support. The overall design, labels, and logo usage of the product give the impression of an original device.

The device features various information labels. These labels indicate features such as “Continuous Operation”, “Oxygen Production at %93 ±3 Purity”, “Instant O2 Level Measurement”, and “Environmentally Friendly”.

Quantity and Accessory Information

The following parts have been identified in the visual:

• 1 Respirox Oxygen Concentrator main unit
• 1 water humidification chamber (humidifier)
• 1 power cord and plug
• 1 transparent hose connected to the humidifier chamber

The essential components required for the device’s operation are present. However, accessories such as a nasal cannula or mask, used to deliver oxygen to the patient, are not visible in the visuals.

Physical Condition Assessment

The device appears to be in generally good condition and clean, though it is a used product. No significant cracks, breaks, or discoloration have been observed on its white plastic casing. Only a very small wear mark is noticeable just above the power button. There is some dust on the lid of the humidification chamber. Mechanical components such as the flow adjustment knob, power button, and control panel buttons are physically intact. As the wheels on the underside of the device could not be discerned in the visuals, their condition cannot be commented upon.

Technical and Electronic Details

On the upper part of the device, there is a digital screen and a control panel. The panel includes an on/off function (I/O), illuminated indicators for alarm and fault conditions, and plus (+) and minus (-) buttons used for adjustments. Since the device was in an off state, the screen could not be viewed in operation, and no operating hours information could be obtained.

On the side of the device, there is a flow meter used to adjust the flow rate of the produced oxygen, with values from 0 to 5 L/min O2 (Liters/Minute Oxygen). The power cord connected to the device has a standard European type plug and is physically in good condition. No label containing specific technical information such as serial number, lot number, or REF code is visible in the visuals.

Potential Risk Assessment

Upon examination of the visuals, no obvious malfunction or damage that would prevent the device from operating has been detected. There are no critical defects that could pose a potential risk of failure, such as crushing on its cable, severe deformation on its casing, or a visible burn mark on its electronic components. The device’s overall physical condition suggests that it could be used for a long time with regular maintenance.