Secondhand Respirox SZ-5BW 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 14.07.2025

RespiroX SZ-5BW Oxygen Concentrator Analysis Report

General Overview and Device Information

The device in the images is an oxygen concentrator. The brand of the device is clearly identified as RespiroX and the model as SZ-5BW. The device is used to provide concentrated oxygen to the user by separating oxygen from the ambient air. Additionally, the “Nebulizing interface” port on the device indicates that it also has a nebulization (medication vapor) function.

The images show 1 RespiroX SZ-5BW oxygen concentrator, 1 humidifier bottle, 1 transparent connecting tube, and 1 power cord.

Status and Condition Assessment

The overall condition of the device is assessed as used. There is visible dust and dirt, especially on the control panel, around the humidifier bottle, and on the general surface of the device. This suggests that the device has been in use for some time or has been in storage. There is no clear information about the duration of use, as there are no documents or screen data available.

Physical and Mechanical Analysis

Upon general inspection of the physical and mechanical components of the device, the following details were observed:

• Casing: No major cracks, breaks, or dents are observed on the white and gray main casing of the device. There is only accumulated dirt and dust on the surface.
• Control Panel: There is a small surface scuff or scratch on the top left corner of the black control panel. The “Run/Stop”, “Timing+”, and “Timing-” buttons on the panel appear physically intact. Since the screen is off, it is not possible to determine if it is working or has any pixel defects.
• Flowmeter: The flowmeter, which indicates the oxygen flow rate and measures in the range of 0-5 L/min, and its adjustment knob are physically intact.
• Labels: The brand and model names on the front of the device are legible. No technical labels containing information such as a serial number, REF code, or manufacturing date are visible in the images.

Accessories and Connections

The accessories and connection points visible with the device are as follows:

• Humidifier Bottle: It is attached to the device. It contains a clear liquid (presumably water) between the MIN and MAX levels. No cracks or damage are visible on the bottle, but the top of its cap is dusty.
• Tube: A transparent tube is connected to the humidifier bottle. The general condition of the tube appears good, but it is not fully visible in the image.
• Power Cord: A black power cord is visible coming from the back of the device. There are no significant crushes or frays on the cord.
• Connection Ports: There are two output ports on the device: “Oxygen outlet” and “Nebulizing interface”. The ports appear physically sound.

Potential Risk Assessment

No obvious malfunction or broken parts were observed on the device. Its general condition can be considered normal for a used device. The dust on the surface may indicate that the internal filters of the device might also require maintenance or replacement. However, no immediate risk requiring urgent intervention, such as crushed cables, severe damage to the casing, or rust, was visually detected.

Note: This assessment is an observation based solely on the provided images. The potential risks mentioned are predictive and do not mean that a failure will definitely occur. A technical service check is recommended for the full functionality of the device.