Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 01.12.2025
Plusmed pM-KN03T Portable Oxygen Concentrator Analysis Report
Device Identification
The product examined in the visuals is a portable oxygen concentrator used to provide respiratory support, suitable for mobile use, battery-powered, and presented with a comprehensive carrying set. The device comes as a set with adapters that allow for desktop or in-car use, and a special carrying bag. This device, falling under the medical electronics category, is designed to enable patients to receive oxygen support in outdoor environments.
Brand and Model
As a result of a detailed analysis of the controls and logos on the front surface of the product, the device’s brand has been clearly identified as Plusmed. Upon examining the technical inscription written directly above the control panel screen, the model number was determined to be pM-KN03T. These identifications were made with 100% certainty based on the original prints on the device casing.
Authenticity
The print quality of the logo on the product, the layout of the keypad, the molding craftsmanship of the device casing, and the complete compatibility of the accessory set (especially the charging station and battery) with the device indicate that the product is an original production. There are no signs of poor quality suggesting an aftermarket or counterfeit production.
Areas of Use
This device is used to help patients suffering from COPD, respiratory failure, or those requiring supplemental oxygen support gain mobility. It is designed for use at home, in a car, or while traveling outdoors. Thanks to its built-in battery and car charging kit, it provides oxygen therapy without needing to be connected to an electrical outlet.
Accessories and Quantity Information
The set shown in the visuals contains a total of 7 product items and accessories. These items are:
- 1 Main Device (Oxygen Concentrator)
- 1 Original Black Carrying Bag (with shoulder strap)
- 1 External/Detachable Battery (White)
- 1 Desktop Charging Stand (Docking Station)
- 1 AC Power Adapter (Black brick type)
- 1 AC Power Cable (for adapter end)
- 1 DC Car Charging Cable (with cigarette lighter plug)
The accessory set appears complete for operating and transporting the device in any environment.
General Condition and Status
The cosmetic condition of the device is excellent. The most striking detail is that the transparent protective film (gelatin) covering the control panel and LCD screen on the main unit has not yet been removed. This indicates that the device has either never been used (new) or has only been unboxed for demonstration purposes. No yellowing or signs of use are visible on the plastic surfaces.
Physical Deformation
No cracks, breaks, deep scratches, or dents have been detected on the product’s casing, corners, or base. Its white plastic casing retains its original brightness and cleanliness. No dust accumulation is observed in the grilles, which proves that the device has been stored in a clean environment.
Mechanical and Electronic Components
The on/off, audible alert, and adjustment buttons on the control panel are intact and in place. The oxygen outlet nozzle (hose inlet tip) on the front of the device is unbroken and clean. The metal connection pins on the charging stand and battery appear bright and show no signs of oxidation or rust. Mechanical connection points appear problem-free.
Screen Analysis
A digital LCD screen is located on the upper part of the device. Since the device is in the off position, screen content cannot be viewed; however, there is a factory protective film on the screen panel. There are no cracks or stains on the screen glass.
Battery Status
The set includes an external battery module that can be mounted on the rear of the device. The battery casing is clean, with no signs of swelling or deformation (such as leakage). An external charging cradle (dock) is also available for charging the battery outside the device.
Dimensions and Compatibility
The device belongs to the “Portable” class and has compact dimensions. It is approximately the size of a vertical handbag. Its bag features transparent windows and openings that allow the device’s screen and air outlets to be used. The car charging adapter is compatible with standard 12V cigarette lighter inputs.
Labels and Technical Information
Apart from the model name pM-KN03T and brand name plusmed on the front panel, no prominent technical label is visible on the front surface. There is a label with technical details on the power adapter, but voltage/amperage values cannot be read due to the visual distance. The battery contains writings with safety warnings.
Potential Malfunction Risk
Since the device’s condition is observed to be very high (likely new) in the visuals, no malfunction risk due to physical damage is anticipated. The cable sheaths are intact, with no crushing or peeling. The presence of the protective gelatin indicates strongly that the device’s electronic lifespan has not yet been consumed.
