Secondhand Medicraft Bilevel BPAP Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 29.01.2026

Medicraft BiLEVEL Respiratory Device Analysis Report

Device Identification

The device in the image is an air pressure generator used for respiratory therapy. The indicators on the panel and the form factor of the device suggest that it is a PAP (Positive Airway Pressure) device used in the treatment of sleep apnea or respiratory failure. The device is the main control unit, which does not have an integrated humidifier reservoir (or it is not attached in the image).

Brand and Model

The inscriptions on the front panel and casing of the device have been examined in detail:

• Brand: The “medicraft®” logo and the slogan “innovative intelligence” below it are clearly legible on the lower part of the front surface. The brand of the device is Medicraft.
• Model: The black label on the upper part of the device contains the phrase “BiLEVEL”. The device belongs to the BiLEVEL (Biphasic Positive Airway Pressure) model or series of the Medicraft brand.

Originality

The font of the “medicraft” logo on the product, the print quality, and the fit of the “BiLEVEL” label on the casing appear regular. The workmanship of the plastic case, the placement of the buttons, and the overall material quality give the impression that the device is an original Medicraft product.

Areas of Use

The Medicraft BiLEVEL device is used particularly in the treatment of sleep-related breathing disorders:

• Treatment Type: Used in conditions such as obstructive or central sleep apnea and respiratory failure like COPD.
• Operating Principle: Applies two different pressure levels to the patient, one during inhalation (IPAP) and one during exhalation (EPAP).
• User Group: While generally used by home care patients, it is also suitable for use in clinical settings.

Quantity Information

Only 1 unit of the Medicraft BiLEVEL device (main unit) is present in the image. No other devices or spare parts are visible.

General Condition

The device is in used condition. While its casing maintains overall integrity, there are signs of use between the buttons and at panel joints. Although it appears cosmetically clean due to its bright white surface, it is not a “New” or “Unopened” product; it is in second-hand condition.

Physical Deformation

The following details were identified during the visual inspection:

• No cracks or breaks were detected in the casing’s integrity.
• No significant yellowing or discoloration was observed on the white plastic casing; its color is homogeneous and bright.
• No signs of impact or deep scratches are visible.

Mechanical Components

The front panel of the device has four control buttons:

• Confirm/Menu button
• Up arrow button
• Down arrow button
• Power button

The silicone or plastic coatings of the buttons are intact, and the symbols on them have not worn off. However, there is a slight accumulation of dust and dirt around the edges of the buttons (especially between the arrow keys). While this does not pose a mechanical problem, it indicates a need for cleaning.

Electronic Components and Screen Analysis

There is a small LCD screen on the upper part of the device:

• The screen is currently off, so it is not possible to analyze for dead pixels, backlight issues, or error messages.
• No deep scratches or cracks are visible on the screen glass.
• Since the device is not connected to power, its electronic functions (such as pressure blowing status, sensor operation, etc.) cannot be commented on based on the visual.

Accessories

The analysis in the image reveals the most critical deficiencies. The device is shown only as a “Casing”. The following essential accessories are NOT PRESENT in the image:

• Power adapter and power cable.
• Patient hose (circuit).
• Mask (Nasal or full-face mask).
• Carrying bag.
• Air filter (Could be on the back or side of the casing, but its condition cannot be confirmed in the image).

Size and Compatibility

The device is a compact desktop model suitable for bedside table use. It is of standard home-use respiratory device dimensions, suitable for adult patients.

Battery Status

No internal battery indicator or external battery pack is visible in the image. Devices of this type usually operate directly from mains electricity (adapter). A portable battery system is not present in the image.

Label and Technical Information

Apart from the brand and model, no technical data (REF number, Serial Number – SN, Lot Number) is found on the front surface of the device. This information is usually located on a label on the bottom or rear surface of the device, but it could not be reported as there is no visual from these angles.

Potential Fault Risk

Based on the visual inspection, the device appears to be in good condition. However, the dirt accumulation between the buttons indicates that the device has been used for a certain period. In such second-hand devices, the possibility of a reduced air turbine (motor) lifespan due to prolonged use should always be considered. Other than that, no physical risk requiring immediate intervention is visible on the casing or screen.