Secondhand Resmed S9 VPAP ST-A BPAP ST Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 03.09.2025

ResMed S9 VPAP ST-A Respiratory Device Analysis Report

General Assessment

The product shown in the images is a respiratory support device manufactured by ResMed. Based on the information provided on both the front surface and the rear label of the device, the product model has been identified as S9 VPAP ST-A. The device is used to provide non-invasive ventilation for conditions such as respiratory failure or sleep apnea. Judging by the logo, label quality, and craftsmanship details in the images, the product appears to be original. The set includes the device itself, a power adapter, a carrying bag, and user documentation.

Brand and Model Identification

During the detailed inspection, the ResMed brand and VPAP ST-A model designation are clearly visible on the device’s front panel and on the label of the carrying bag. On the manufacturer’s label located on the rear side of the device, the series of the device is stated as S9. In light of this information, the full brand and model of the product have been confirmed as ResMed S9 VPAP ST-A.

Physical Condition and Deformations

The device is generally in good condition and has a clean appearance. No significant deformations such as scratches, dents, cracks, or color fading have been observed on the product, which appears to have been used. The device’s casing and screen are intact. The protective film on the power adapter is observed to be peeling, but this does not pose a functional issue.

Mechanical and Electronic Components

Mechanical parts such as the power button, alarm mute button, and adjustment wheel on the device’s front panel are in place and appear physically sound. The power socket, data port, SD card slot, and air filter cover located on the rear are also complete and undamaged. While the functionality of the electronic components cannot be determined from the images, there are no signs of burns or physical damage.

Accessories and Completeness

The accessories included with the product in the images are as follows:

• Carrying Bag: An original carrying bag, specifically designed for the device and featuring the “ResMed” logo, is present.
• Power Adapter and Cables: The power adapter and connection cables necessary for the device’s operation are included.
• Documents: Printed materials such as the “ResMed VPAP ST-A Information Guide” user manual and quick start guide are available.
• SD Card: An SD card is observed to be inserted in the slot on the rear panel of the device.

Accessories necessary for patient use, such as the respiratory circuit (tubing) and mask, are not present in the images.

Label and Technical Information

The information on the label on the back of the device is listed below:

• Brand: ResMed
• Model Series: S9
• Origin: Made in Australia
• Serial Number (SN): 22161154587
• Reference Code (REF): 36219
• Lot Number (LOT): 1166625
• Power Requirement: DC 24V / 3.75A
• Protection Class: IP21

Potential Malfunction Risk

Based on the examination of the images, no signs indicating a potential malfunction risk such as significant wear, rust, crushed cables, or broken parts were detected on the device. The product gives the impression of being well-preserved and maintained, suggesting a low probability of a malfunction in the near future.