Secondhand Weinmann CPAP 20e CPAP Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 26.07.2025

Weinmann CPAP 20e Device Analysis Report

Device Description and Area of Use

The product shown in the images is a Weinmann brand CPAP 20e model respiratory device. This device is used in the treatment of respiratory disorders such as obstructive sleep apnea and hypopnea syndrome. Its primary function is to prevent the cessation or slowing of breathing during sleep by providing continuous positive airway pressure to the patient’s airway. It operates on the principle of an electrically powered flow generator; it takes in ambient air through a filter, pressurizes it, and delivers it to the patient’s mask via a respiratory hose.

General Status and Condition

As can be understood from the images, the general condition of the device is used. No significant color fading or yellowing is observed on its white casing. It can be said that the device is generally clean and has a well-maintained appearance. No broken or cracked parts have been identified. This indicates that the device has been used with care.

Physical and Mechanical Assessment

Upon inspection of the device’s casing, no serious scratches, dents, or impact marks were found. The control buttons and screen on the front surface of the device appear to be intact. On the bottom of the device, there are four black rubber feet, presumed to be for anti-slip purposes, and these feet are in good condition. The filter cover and the black sponge filter inside it, located at the rear, are in place and show no visible deformation. The air outlet port and other socket inputs have a clean and undamaged appearance.

Electronics and Accessories

There is no evidence in the images to indicate whether the device is in working order. However, it is seen that basic accessories such as the device’s power cord and a respiratory hose are present. Additionally, there is a DC power input and an RJ45 (Ethernet-like) data port on the back of the device. This port is likely used for configuring the device’s settings or for data transfer. It cannot be determined from the images whether there are other accessories in the box or if any parts are missing.

Label Information and Technical Details

The label on the bottom of the device contains important technical information. According to this information, the device’s specifications are as follows:

• Brand: Weinmann
• Model: CPAP 20e
• Type: WM 24400
• Serial Number: 153861
• Year of Manufacture: 2014
• Power Requirement: 115 V ~ 50-60 Hz 0.28 A or 230 V ~ 50-60 Hz 0.14 A
• Manufacturer: Weinmann GmbH + Co. KG, D-22525 Hamburg

The label also features the CE 0197 mark and various safety symbols. This indicates the product’s compliance with European Union standards.

Screen Analysis

There is a small digital screen on the front of the device. The screen displays the phrase “1 kPa = 1 cmH2O”. This provides information about the device’s pressure unit. No error messages or warnings are observed on the screen.

Potential Risk Assessment

Based on visual inspection, no conditions such as severe wear, rust, or crushed cables that would suggest an immediate risk of failure have been observed. The overall condition of the device appears to be good. However, this assessment is an estimate based solely on external appearance and does not guarantee that the device’s electronic or mechanical components are fully functional. Being a 2014 model, it should be considered that internal parts may have worn out over time, but no alarming conditions have been identified in its current appearance.