Secondhand Burmeier 3 Motors Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 28.08.2025

Motorized Bed Analysis Report

Overview and Product Identification

The images show a motorized bed with head and foot panels made of wood-look material and a metal frame. It is understood that the product is a patient bed designed for the comfort of patients or individuals with limited mobility, allowing the head, back, and foot sections to be raised and lowered. There is no mattress on the bed. The total count of the product in the images consists of one bed and one wired remote control.

Brand and Model Information

No brand or model information was found on the bed’s frame or panels. However, brand and model details are clearly visible on the motor assembly that provides the bed’s movement. This information belongs to the motor system located on the bed, not to the bed itself. It has been determined that an Ilcon brand, ilcoDrive E2 model actuator (motor) is used in the bed’s movement mechanism.

General Condition and State

The general condition of the bed is assessed as used. No significant, large breaks or cracks were observed in the metal components or wooden panels. While the overall structure of the product appears sturdy, there are some superficial flaws due to use. It is understood to be an original product, judging by its workmanship and material quality.

Physical Deformation Analysis

Upon detailed examination of the product’s physical condition, the following points were identified:

• Metal Frame: Small scratches and slight friction marks are present in places on the beige-colored metal frame of the bed and on the metal bars forming the mattress platform. No significant rusting or bending was observed.
• Wooden Panels: A small, white friction mark or stain is present on the surface of the foot panel. There is no significant deformation in the head and foot panels overall.
• Remote Control: White colored tapes are present on the body of the wired hand remote control. Although the reason for these tapes being affixed is unclear, it can be assumed they might have been used to conceal a possible crack or for repair purposes.

Mechanical and Electronic Components

The mechanical components of the bed generally appear to be in good order. The metal grilles forming the mattress platform are complete and in place. The motor system, ilcoDrive E2, has a sturdy structure in terms of its outer casing. The remote control’s cable is coiled and shows no visible breaks or crimping. The buttons on the remote control include icons used to move the back, leg, and foot sections of the bed, and are physically intact.

Technical Label Information

The technical information on the motor unit’s label is listed below. This information provides details about the motor’s operating principles and identity:

• Brand: ilcon (LINEAR ACTUATOR CONCEPTS)
• Model: ilcoDrive E2
• Part Number (P/N): 1.05.000.679.30
• Serial Number (S/N): 101161963
• Input Voltage: 24 V / 4A
• Maximum Push Force: 2500N
• Protection Class: IP X4
• Operating Principle: ED 10% at max. 1 min. of 2 min. (Principle of running for a maximum of 1 minute and resting for 2 minutes) or 5 cycles per minute.
• Place of Manufacture: Hungary (Made in Hungary)

Accessories and Missing Parts

The images show one wired hand remote control belonging to the bed. Apart from this, no other accessories such as a mattress, side rails, or a charging/power adapter are visible. Therefore, it is understood that the 24V power adapter, which is necessary for the product’s operation, is missing.

Potential Risk Assessment

As far as can be understood from the images, the product’s mechanical components appear sturdy and in working order. The observed small scratches and marks are merely cosmetic flaws and are not of a nature to affect the bed’s functionality. The most significant potential risk is the presence of tapes on the remote control. This situation could indicate a hidden damage in the remote control’s casing. Additionally, there is a risk of the remote control cable sustaining internal damage over time due to bending. Overall, it is anticipated that the product can be used without problems once the power adapter is acquired.