Secondhand Gemesan 601 4 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 16.12.2025

GEMESAN Electric Hospital Bed Analysis Report

Device Identification

The product examined in the visuals is a professional electric hospital bed used in patient care in hospitals and healthcare institutions, featuring motorized adjustment mechanisms, side rails, and head/foot panels. The product consists of plastic (ABS) sleeping surfaces mounted on a metal chassis and movable components.

Brand and Model Information

As a result of the detailed visual examination conducted, the brand and model data obtained are as follows:

• Hospital Bed Brand-Model: The GEMESAN logo is clearly visible on the control panel located on the product’s side rails. The exact model number of the bed (e.g., “G-xxx”) is not readable on the labels on visible surfaces, but the manufacturer is definitely GEMESAN.
• Patient Mattress (Overlay) Brand-Model: No foam or air patient mattress (overlay) is present on the bed in the visuals. The bed is displayed without a mattress.
• Handset Code Information: The code RYCB-SBH4A is located at the very bottom on the front surface of the wired handset. This code is typically a control part reference used in bed motor systems.

Originality and Place of Manufacture

On the integrated control panel of the bed’s side rail, the phrase “Made in Turkey” (Produced in Turkey) is located in English below the brand logo. The print quality of the control panel, the original font of the GEMESAN logo, and the overall workmanship details indicate that the product is an original Gemesan production.

Areas of Use

This product is designed to enhance the care comfort of patients with limited mobility or bedridden patients, to electronically adjust the patient’s position, and to facilitate intervention by healthcare personnel. It is suitable for use in hospital inpatient wards, intensive care units, and professional home care processes.

General Condition and Physical Condition

The general condition of the product can be described as “used but clean”:

• Chassis and Body: The metal chassis and connection points appear sturdy. No noticeable deep rusting or major paint peeling on the beige/cream colored paint has been detected in the visuals.
• Plastic Components: The head, foot panels, and side rails (ABS panels) maintain their integrity. No significant breakage is observed on the blue decorative strips of the side rails or on the corner bumpers.
• Cleanliness: While the device generally appears clean, there might be slight dust accumulation in the inner parts of the rail mechanisms and on the wheels due to use. Light wiping marks are present on the control panel surface.

Mechanical and Movable Components

Visual analysis of the mechanical components is as follows:

• Side Rails: The device has a total of 4 independently movable side rail sections (split side rails), with two on each side. In the visuals, these rails are seen to be able to remain in both open and closed positions.
• Sleeping Surface: The bed platform consists of perforated plastic panels. It is clearly visible that the back and foot sections of these panels rise and lower (in the 2nd visual), which is visual evidence that the mechanism is functional.
• Wheels: The bed is on four swivel wheels, and a braking mechanism is present on the wheels. The plastic covers of the wheels are in place.
• IV Pole: There are slots available in the corner sections of the bed for attaching an IV pole, and in one of the visuals (1st visual), a metal IV pole can be discerned next to/above the bed.

Electronic Components and Controls

The product is a fully electric model, and two different control points have been identified:

• 1. Side Rail Integrated Control Panel: A membrane keypad is located on the outer surface of the side rail for use by care personnel.
  • Available Functions: Buttons for back section raise/lower, foot section raise/lower, and bed height (Elevator/Hi-Lo) adjustment are present. The buttons are coded with yellow/white triangular icons on a blue background.
• 2. Wired Handset: A coiled-cable handset is available for the patient to adjust their own position. The handset features a 4-row button group with symbols for back, foot, and presumably height adjustment. No yellowing or significant deformation is observed on the handset casing.

Quantity Information

The quantity of the main product analyzed in the visuals is 1 hospital bed. Additionally, there is 1 handset connected to the bed.

Battery Status

From the visuals, it cannot be definitively determined whether the device has an internal battery (Back-up battery). Generally, advanced motorized beds of this type have a battery option to guard against power outages, but visual confirmation could not be made as the battery box is usually hidden at the bottom of the chassis.

Label and Mark Analysis

The following data has been gathered from the labels on the product:

• Logo: “GEMESAN” (On the side panel).
• Origin: “Made in Turkey”.
• Control Ref: “RYCB-SBH4A” (On the bottom of the handset).
• Icons: Patient positioning symbols compliant with international standards (Back raise, foot raise, etc.) are used on the control panels.

Existing Fault and Risk Assessment

As a result of the visual inspection, no significant breakage (major crack), broken cable, or damaged part that would prevent the device from operating has been detected. The device gives the impression of being “in working condition”; however, it cannot be guaranteed through visual analysis alone that all electronic functions (all motors and buttons) are active. Since the bed platform (2nd visual) can remain in a raised position, it can be said that the pistons’ holding force is at least intact. No potential risk is observed other than minor cosmetic wear due to use.