Secondhand Hepa H328-ABS 3 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 26.02.2026

Electric Patient Bed and Accessories Analysis Report

Device Identification

The product displayed is an electric motor-driven patient bed suitable for home use or hospital ward use, featuring adjustable height, back, and leg sections. The product set consists of a bed frame, mattress, IV pole, and a wired hand control.

Brand and Model Information

Patient Bed Brand-Model: No manufacturer logo, brand label, or model number is present on the product’s casing, headboards, side rails, or frame. Brand identification cannot be made based on visual data.

Patient Mattress Brand-Model: No label or print indicating brand or model is visible on the mattress.

Originality

The bed’s metal workmanship, weld joints, and ABS plastic moldings (headboards and side rails) are in accordance with industrial standards. However, due to its unbranded nature, there is a high probability that the product is an OEM (Original Equipment Manufacturer) production or a locally assembled product with its label removed. No visual reference point is available for originality inquiry.

Areas of Use

This product is suitable for use in hospital wards, nursing homes, and for patients requiring home care. It is specifically designed to facilitate patient care for those with mobility limitations, providing positioning functions (back elevation, leg elevation) and bed height adjustment (lift) for caregiver ergonomics.

Quantity Information

A total of 1 (one) product set is displayed in the visuals. Set contents:

• 1 Unit patient bed frame (Including head and foot end panels)
• 1 Unit foam patient mattress
• 1 Unit wired hand control
• 1 Unit metal IV pole

Overall Condition

The product is in second-hand condition and appears to have been used. It maintains its mechanical and cosmetic integrity. While there are no signs of severe damage, there are traces of use. The device appears to be in operational condition.

Physical Deformation

No significant rust or bending is observed in the bed’s metal components. Deep scratches are not visible on the wood-look laminated sections of the head and foot end panels. There is some dullness on the wheel plastics due to use.

Mechanical Components

Side Rails: It has 4-part, independently operating side rails made of PP (Polypropylene) or ABS material. The rail latches and folding mechanisms appear sturdy in the visual.
Frame and Movement System: The scissor lift mechanism, which provides height adjustment, is visible in the visual. The weld connections appear sturdy.
Wheels: There are 4 wheels that can rotate 360 degrees. Although the presence of a cross-braking system cannot be fully confirmed from the visual, they are of standard medical wheel construction.

Electronic Components

Underneath the frame, cables leading to the linear actuator motors and a coiled control cable are visible. The cables were observed to be disorganized and hanging; plastic cable ties were used for cable management. No visible tearing was detected on the outer sheaths of the cables.

Accessories

Hand Control: A white, wired hand control connected to the device is present. The control surface is clean.
IV Pole: A white-painted metal tube-type, 4-hooked (curved metal) IV pole, mounted in the slot at the corner of the bed, is present. There is no physical bending in the pole.
Mattress: A zippered mattress, suitable for the bed dimensions, with a white liquid-proof (estimated) cover/case, is present. No yellowing or significant stains were identified on the cover in the visual.

Battery Status

An external battery box (back-up battery) or power unit box is not clearly discernible in the visuals. However, these types of motorized beds typically operate with mains electricity. The presence of a battery could not be confirmed.

Label Information

No readable label containing a serial number, REF code, lot number, or technical specifications table is present on the product in the visual.

Screen Analysis

The device does not have an LCD or digital screen. The hand control features analog buttons and a possible LED indicator light at the top.

Control Function Analysis

The hand control in the visual has 8 buttons (4 rows x 2 buttons). The functions understood from the icons are:

• 1st Row: Back (Head) Section Up – Down Movement
• 2nd Row: Leg Section Up – Down Movement
• 3rd Row: Simultaneous Movement (Back and Leg simultaneously – Fowler position)
• 4th Row: Height (Lift) Up – Down Movement

Dimensions and Compatibility

The product is of standard adult size (estimated inner mattress dimensions are close to 90×190 cm or 90×200 cm standard). It does not have special equipment for pediatric use.

Documents

No invoice, warranty certificate, or user manual was found in the visuals. Whether its warranty is still active is unknown.

Usage Period

Since there is no run-time meter on the device, no data regarding its usage period can be obtained.

Existing Fault

There is no evidence in the visuals indicating a functional fault such as a broken part, severed cable, or mechanical collapse.

Potential Fault Risk

Hanging cables under the chassis pose a risk of entanglement with the wheels or getting caught in the moving parts (scissor system). Cable management should be reorganized. As there are no signs of external rust or metal fatigue, its condition is considered good.