Secondhand Hill-Rom Avantguard 1200 3 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 15.07.2025

Hill-Rom AvantGuard 1600 Hospital Bed Analysis Report

General Overview and Product Identification

The product in the images is one electric hospital bed. The brand and model of the product have been clearly identified from the text on its frame as Hill-Rom AvantGuard 1600. The overall structure and control panel of the bed suggest that the product is original. This bed is used in hospitals, nursing homes, or home care settings to position patients, provide comfort, and ensure their safety.

• Hospital Bed Brand-Model: Hill-Rom AvantGuard 1600
• Hospital Mattress Brand-Model: There is no mattress for the bed in the images.

Quantity Information

There is 1 unit of the Hill-Rom AvantGuard 1600 model hospital bed in the images. There is no mattress or any other external accessory on the bed.

Physical Condition and Cosmetic Assessment

The bed is a used product and shows general signs of use. Scratches and slight discoloration are observed on the plastic components, such as the headboard, footboard, and side rails. Dirt and stains are particularly noticeable on the control panel integrated into the side rail. However, no major cracks, fractures, or dents that would affect the overall structure of the bed have been identified.

Mechanical Components and Controls

Upon visual inspection of the bed’s mechanical parts, no obvious problems are visible.

• Side Rails: The rails on both sides are in the up position, and there is no visible damage to their mechanisms.
• Control Panel: A wired control panel attached to the side rail is present. The buttons on the panel are physically in place. No crushing or breakage is visible on the panel’s cable. The icons on the panel indicate that back, leg, and height adjustments can be made.
• Casters: The bed has all four casters, and no damage that would impede mobility has been observed.
• Bed Platform: The platform where the patient lies is made of plastic material and has a sectional structure. There are no breaks in this platform.

Accessories and Missing Parts

In the images, there are no external accessories (such as an IV pole, mattress, etc.) other than the control panel integrated into the bed. The most significant missing part of the bed is its mattress.

Label and Technical Information

The brand and model information on the bed’s footboard panel is clearly legible. However, the resolution of the images is insufficient to read labels containing detailed technical information such as the product’s serial number, REF code, or year of manufacture. Therefore, this information could not be included in the report.

Potential Risk Assessment

The product is a used medical device that appears to be in generally good condition. No severe wear and tear, such as rust, crushed, or exposed cables, that could pose an immediate risk of failure has been identified in the visuals. The dirt on the control panel is a cosmetic issue and may not affect its functionality. This assessment is based solely on visual evidence and does not imply that all electrical and mechanical functions of the bed are operational.