Secondhand Kenmak K012/EP-3M 3 Motors Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 20.01.2026

Kenmak 4-Motor Electric Patient Bed Analysis Report

Device Identification

The examined visuals belong to a fully equipped electric patient bed designed for medical use. The device set consists of the bed frame, headboard and footboard panels, side rails, patient mattress, and a wired hand control.

Brand and Model Information

• Patient Bed Brand-Model: The KENMAK brand is clearly identified in the visuals on both the footboard panel (embossed on the plastic mold) and the headboard panel. Although the model name label is not visible from the visual angle, it is 100% certain that the product brand is Kenmak.
• Patient Mattress Brand-Model: The mattress on the bed is completely covered with blue protective packaging, so its brand or model could not be identified.

Functional Features and Control Analysis

As a result of a detailed examination of the wired hand control, definitive technical data regarding the device’s capabilities and number of motors has been obtained. There are a total of 8 buttons on the control, indicating that the device is 4-motor. The functions are as follows:

• Back Section Adjustment: The buttons on the top row of the control raise and lower the back (head) section of the bed.
• Leg Section Adjustment: The buttons on the second row adjust the angle of the knee and foot area.
• Height (Lift) Adjustment: The icons on the third row indicate that they adjust the overall height (lowering and raising) of the bed from the ground. This feature is intended to facilitate patient intervention and help the patient get in and out of bed.
• Trendelenburg / Reverse Trendelenburg Adjustment: The buttons on the bottom row control the motor that allows the entire bed to tilt head-down or foot-down (Trendelenburg positions).

Condition and State Assessment

Overall Condition: Visually, the product appears to be in “New” or “Refurbished” condition. The fact that the mattress section is still inside its blue protective packaging plastic indicates that the product has never been used or has not been made available for use after sterilization/packaging.

Physical Deformation:

• ABS Panels: The headboard and footboard panels (parts with the Kenmak logo) and side rails are clean. No breaks, cracks, or significant scratches have been detected.
• Body Color: No yellowing or color fading is observed in the plastic components. The white/cream-colored plastics retain their vibrancy. The wood-look decorative parts on the head and foot panels are undamaged.
• Mechanical Components: The bed’s side rails appear sturdy. Although the bed’s wheel system is partially visible in the image, it is understood that they are present and in good condition.

Electronic Components and Battery

There is a green LED indicator next to the “Power On” text on the control. In the visual, this light is off (the device may not be plugged in). The control cable has a coiled structure, and no breaks, crushing, or wear are observed in its insulation. The control surface and buttons (membrane keypad) are clean; there is no fading or abrasion. It cannot be determined from the visuals whether the device has an internal battery.

Accessories and Display

• Accessories: The product comes with 1 wired hand control and 1 packaged sponge patient mattress. No other accessories (such as an IV pole, etc.) are seen mounted on the bed.
• Display: The device does not have a digital display (LCD/LED). Control is provided via a manual button-operated hand control.

Areas of Use and Compatibility

Due to its high maneuverability (being 4-motor), this product is particularly suitable for use in the following areas:

• Intensive Care Units (due to the Trendelenburg feature).
• Hospital inpatient wards.
• Home care patients (suitable for home use, offering an aesthetic appearance with its wooden details).
• Patients with limited mobility and those requiring position changes.

Potential Malfunction Risk

The product’s condition appears excellent in the visuals. There are no elements that would pose an immediate risk, such as rust, cracked casing, or damaged cables. Therefore, no malfunction risk is anticipated based on the visual inspection.

Quantity Information

The quantity of the product analyzed in the visuals consists of 1 (one) patient bed and its integrated accessories (mattress and control).