Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 06.01.2026
LINEALIFE Brand Patient Bed and POLIMOT Motor System Analysis Report
Device Identification
Based on the analysis of the visuals, the product has been identified as a medical patient bed with an electric motor system, movable side rails, and adjustable height. The device is a professional bed designed to ensure patient comfort and safety in home care or clinical environments. The system consists of a bed frame, mattress, motor system, remote control, and one IV pole accessory.
Brand and Model Information
As a result of detailed examinations in the visuals, brand and technical equipment information has been determined as follows:
- Patient Bed Brand-Model: The original remote control of the bed clearly features the LINEALIFE logo. However, no specific model name (e.g., Pro-X etc.) was found on the bed frame.
- Motor Brand-Model: The label on the piston motor (linear actuator) system used in the bed clearly reads POLIMOT as the brand and ELA01 as the type code.
- Patient Mattress Brand-Model: No brand logo or label was observed on the gray-covered foam mattress on the bed, so its brand could not be determined.
Label Information and Technical Data
The technical label on the product’s motor block has been analyzed in detail, and the following data has been obtained:
- Brand: POLIMOT – Powered Linear Motion
- Origin: MADE IN TURKIYE (Manufactured in Turkey)
- Type: ELA01
- Power Rate: 24VDC MAX: 5.5A
- Max. Load: 8000N (This value refers to the motor’s thrust force, equivalent to approximately 800 kg of force)
- Duty Cycle: 10% Max. 2min./18min. (Must be rested for 18 minutes after 2 minutes of operation)
- Protection Class: IPX6 (Protected against powerful water jets)
- Certifications: CE Mark is present.
- QR Code: A QR code for directing to technical service or the product page is present on the label.
Remote Control and Function Analysis
The handheld remote control (Linealife branded) shown in the visual has an 8-button structure and a “CPR” function. The button layout indicates the following functions:
- 1st Row: Back section raising and lowering function.
- 2nd Row: Foot/Leg section raising and lowering function.
- 3rd Row: Simultaneous movement (Fowler position) or a similar combined movement according to the iconography in the visual.
- 4th Row: Bed height adjustment (Lift feature) up and down movement.
- CPR Button: A red heart-logo security button that quickly flattens the bed in emergency situations (such as requiring cardiopulmonary resuscitation).
Usage Areas
This product is designed for patients with limited mobility, the elderly, or individuals requiring home care. The ability to move the head and foot sections provides respiratory and circulatory comfort, while the height adjustment (lift) feature facilitates patient transfer to and from the bed and caregiver intervention. It is suitable for hospitals, nursing homes, and home patient care processes.
Quantity Information
The visuals show 1 main patient bed frame, 1 gray-covered mattress, 1 wired handheld remote control, and 1 white metal tube-shaped IV pole that can be integrated into the bed.
Overall Condition and Physical Condition
The general condition of the device appears good and clean. Even though it is in second-hand status, it is observed to be well-maintained, with no rust or significant paint chips on the metal parts.
- Chassis and Metal Parts: The white-painted metal chassis is vibrant. No bending or detachment is visible in the scissor lift mechanism (lift system).
- Plastic Parts: The head and foot panels, along with the side rails, are made of durable ABS plastic material. The mechanisms of the side rails are in place.
- Wheels: All 4 wheels are present, and their locking (brake) mechanisms are visible.
Electronic Parts Condition
The outer casing of the motor unit (actuator) is intact, its label is legible, and no physical breakage has been detected. No significant crushing, breakage, or external damage is noticeable on the remote control cable and its coiled structure. The motor plug appears to be grounded.
Mechanical Parts Analysis
The “scissor lift” system, which provides height adjustment for the bed, appears to be in proper order visually. The locking levers of the side rails (red lever parts) are present in the visual and are not broken. IV pole slots are available at the corner parts of the bed.
Accessories
One metal IV pole is visible with the product. The rail gaps on the sides of the bed, where the remote control can be hung, are functional. An external battery pack could not be identified in the visual; the system was observed with a direct mains power cable.
Potential Malfunction Risk
No breakage, crack, or critical deformation has been observed in the product in the visuals. As long as the “Duty Cycle” warning on the product’s motor label is heeded, it is anticipated that its current physical condition will not pose a significant risk of malfunction in the short term. The device appears ready for use and robust.
