Secondhand MSC 3 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 18.12.2025

Analysis Report for 4-Motor Functional Patient Bed and Mattress

Device Identification and Product Description

The product analyzed in the visuals is a comprehensive, electronically controlled, and multi-functional patient bed. The device features an ABS plastic-paneled head and footboard system, four-piece (split) side rails, and a full-size mattress (patient bed). Upon examining the general structure of the device and the function buttons on the hand control, it has been determined that this bed is an advanced medical bed capable of head, foot, height, and tilt (Trendelenburg) movements.

Brand and Model Information

In the product visuals, no readable brand logo, model name, or manufacturer label is present on the bed frame, headboards, side rails, or electronic control. Since brand indications, typically found on the side frames or footboard panel of medical beds, are not present in these visuals, a definitive brand identification cannot be made.

• Patient Bed Brand-Model: No brand or model information is available in the visuals.
• Patient Mattress (Pad) Brand-Model: No brand, logo, or label is visible on the mattress (pad). It is a blue, liquid-proof covered standard medical mattress.

Remote Control and Function Analysis

The hand control integrated into the device has been thoroughly examined, and based on the button combinations, it has been determined to have the following functions:

• Backrest Adjustment (1st Row): Button group used to raise or lower the patient’s backrest.
• Knee/Foot Adjustment (2nd Row): Button group used to raise or lower the foot section.
• Height Adjustment (3rd Row): Function that adjusts the bed’s height from the floor (Lift feature).
• Trendelenburg / Reverse Trendelenburg (4th Row): Function that allows the bed to tilt head-down or foot-down. This feature is typically found in 4-motor beds.
• CPR Button (Bottom): A reset function that brings the bed to a completely flat position with a single button in emergencies.

Areas of Use

This product, thanks to its advanced mobility features, is particularly suitable for intensive care units, fully equipped hospital wards, and long-term bedridden patient care at home. The Trendelenburg and height adjustment features are designed to facilitate patient intervention and enhance patient comfort.

Condition and Status Assessment

Overall Condition: The product exhibits a “New” or “Very well refurbished” appearance in terms of physical condition in the visuals. Metal components are shiny, and plastic parts are spotless and clean.

Physical Deformation: No visible breaks, cracks, rust, paint chips, or color fading have been detected on the frame, side rails, headboards, or wheels. The wood-look decorative strips on the head and footboard panels are intact.

Mechanical Components:

• Side Rails: The 4 independently operating, shock-absorbing or mechanically locked ABS side rail system appears sturdy. The angle indicators of the side rails (blue detailed sections) are in place.
• Wheels: 360-degree swivel wheels, each with an independent braking system (cross-lock or lever brake), are present. The wheels are in a clean condition.

Electronic Components and Battery: The control cable is spiral-shaped and is not broken or deformed. Although the motor box and pistons are located under the bed and are not visible in detail in the visuals, the presence of the control panel proves that the system is electronic. The battery status (back-up battery) cannot be determined from the visuals.

Accessories and Missing Parts Check

• IV Pole: The IV pole sockets on the bed are present (holes are visible in the head-end corners), but the IV pole accessory is not in the visuals.
• Mattress (Bed): A blue, likely laser-cut or visco-elastic medical mattress is included with the product. The mattress cover is smooth, with no visible sagging or tears.

Quantity Information

The visuals show 1 electric patient bed and 1 patient mattress (pad) on it. No other spare parts are displayed.

Originality and Potential Risk Analysis

Originality: The quality of workmanship on the product, the compatibility of the side rails, and the standard medical symbols on the remote control indicate that the product is a professional production (Industrial Medical Manufacturing). However, due to its lack of branding, it might be an OEM product.

Current Faults or Risks: No apparent faults (broken parts, severed cables, etc.) that would hinder use are visible in the visuals. The product appears to be in a ready-to-use, clean condition.