Secondhand MSC 3 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 10.01.2026

Detailed Analysis Report of Electric Hospital Bed and Mattress

Device Identification

The main product analyzed in the images is a multi-functional hospital bed, designed for patients receiving treatment while lying down, moved by electric motors, and a patient mattress positioned on it. The bed frame has a multi-section (4-panel) lying platform that can change the angles of the head, sitting, and foot sections. Additionally, there are movable side rails to prevent falls.

Brand and Model Information

During a detailed examination of the images, a circular blue logo graphic was detected on the product’s plastic components; however, due to the resolution of the photograph and the shooting angle, the texts within the logo could not be read. Therefore, to avoid incorrect guidance, and in accordance with the principle of 100% certainty, brand and model information cannot be specified. Visually, the product falls into the category of a standard medical ABS-coated 3 or 4 motor hospital bed.

Originality and Craftsmanship

The quality of the ABS plastic material used in the product’s side rails, the paint of the metal frame, the integration of the angle indicators, and the mechanical joints indicate that the product is factory-made and industrially produced. It is not an aftermarket or homemade product; it appears to be an original device manufactured according to professional medical standards.

Areas of Use

This product is suitable for use in the following areas:

• Hospitals and Clinics: For monitoring and treating inpatients in ward rooms.
• Home Care Services: For comfortable care of paralyzed, bedridden, or long-term treatment patients in a home environment.
• Nursing Homes and Care Centers: For positioning and ensuring safety in elderly care.

Quantity Information

The parts identified in the images are:

• 1 Unit Hospital Bed Frame (Including motor and rail systems).
• 1 Unit Sponge Patient Mattress (Overlay).
• 1 Unit IV Pole (Mounted on the head section).

General Condition and Physical Analysis

The product is used but in a well-preserved condition. Physical and mechanical examination notes are as follows:

• Chassis and Metal Parts: The metal frame of the bed is white oven-painted, and no visible rusting or paint chipping has been detected. The frame appears sturdy.
• Plastic Components (Rails and Headboards): The headboards and side rails (total of 4 independent rails) are intact. No significant discoloration or deep cracks have been observed on the blue label areas on the white plastic.
• Physical Deformation: There are no dents, dings, or broken parts on the body. The mechanical connection points of the rails are in place.

Patient Mattress (Overlay) Condition

The mattress on the bed is covered with a light blue cover resembling non-woven fabric. In one of the images, the yellow foam filling inside the mattress is visible. It is not clear whether the mattress has its original fully enclosed waterproof cover; the existing blue cover appears to be laid for protective purposes. The foam filling retains its shape, and no significant sagging is observed.

Mechanical and Electronic Component Analysis

Technical findings based on visual inspection:

• Motor System: Linear actuator motors, which move the bed platform, are partially visible under the bed frame. This confirms that the product is an electrically operated model, not a manual one.
• Side Rail Mechanism: The side rails resemble “shock-absorbing/damped” systems that can be moved up and down with latch mechanisms. Open and closed positions are available in the images.
• Angle Indicator: An analog angle indicator is present on the side rail. The indicator dial bears the marks 0, 20, 40, 60, 80 degrees, and its needle is present. This indicator helps monitor the patient’s back or foot angle.
• Wheel System: Although the wheels are not fully discernible in the images, the chassis structure is suitable for a wheeled system.

Accessories

Accessories identified on the device:

• IV Pole: A metal tube-type IV pole is present, attached to the headboard of the bed.
• Mattress Protector: A thin blue protective layer is present on the mattress.

Labels and Markings

No model label with readable text (REF, SN, Lot) is present in the visual angles on the product. Only the dial markings showing angle values (0-80) on the side rail are clearly readable.

Potential Malfunction Risk and Evaluation

As a result of the visual inspection, no breaks, cracks, or critical damage were detected on the device’s main frame or movable plastic parts. The product appears ready for use. However, since the foam part of the mattress seems exposed to external factors, the mattress cover may need to be checked or replaced for hygienic reasons. The absence of rust indications on the metal components suggests that its mechanical life continues. Its general condition is clean and well-maintained.