Secondhand Nitrocare HB 3340 3 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 09.01.2026

NITROCARE Electric Hospital Bed Analysis Report

Device Detection and Identification

The product in the examined images is a multi-functional, electric motor-driven hospital bed intended for medical use. The product features a metal chassis, ABS (hard plastic) covered head and foot panels, a four-piece independent side rail system, and wheeled mobility. In the images, the product is seen in a patient room setting with a mattress placed on it.

Brand and Model Information

The data obtained from a detailed examination of the labels and logos on the product are as follows:

• Hospital Bed Brand-Model: Based on a clearly readable label in one of the images (at the corner of the bed chassis), the brand of the product has been identified as NITROCARE. The label also includes a link to the manufacturer’s website. Since there is no specific writing or code indicating the model name (e.g., HB 6350) in the images, a definitive determination regarding the model number has not been made.
• Patient Mattress Brand-Model: No visible label or logo regarding the brand of the foam or visco patient mattress (bedding) covered with a gray/patterned sheet on the bed could be identified.

Originality Assessment

The NITROCARE logo on the bed, its font, the colors used, and the placement of the label on the chassis are consistent with the company’s original production standards. The design of the side rails and the molding of the head/foot panels indicate high-quality production in accordance with industrial standards. Based on visual evidence, the product is assessed to be an original Nitrocare production.

Areas of Use

This hospital bed is suitable for use in hospital inpatient services (internal medicine, surgery, neurology, etc.), private clinics, nursing homes, and home patient care processes requiring long-term care. By adjusting the patient’s sleeping position (back lift, leg lift) with electric motors, it both increases patient comfort and lightens the workload of care staff/companions.

General Condition and State

Upon examining the general condition of the product, the following observations were made:

• Cosmetic Condition: The general appearance of the device is clean. No significant signs of rust or corrosion are visible on the metal components. No deep scratches or breaks, which might occur due to use, were detected on the plastic headboard and side rails. However, the product is in a second-hand (used) condition.
• Cleanliness: While the product generally appears clean, the possibility of dust accumulation in the lower mechanical parts or hard-to-reach details is probable, given that the environment is a care room.

Mechanical Components Analysis

The following details stand out from the mechanical examination conducted using the images:

• Side Rails: On both sides of the bed, there are a total of 4 independently operating side rails with shock absorbers/mechanisms. The mechanical integrity of the rails appears sound, and no deformation such as sagging or detachment is observed in the images.
• Chassis and Body: The metal chassis is painted gray, and the paint condition is good. No bending or crushing has been detected in the profile structure.
• Wheels and Bumpers: At the four corners of the bed, there are circular bumper pads that provide protection against wall impacts. The bed legs have wheels, likely equipped with a locking mechanism (although the detailed type of wheels and their locked state cannot be clearly distinguished from the images, the structure is wheeled).

Electronic Components and Accessories

Details regarding the control and electronic equipment of the electric hospital bed are as follows:

• Hand Remote Control: There is 1 wired hand remote control attached to the product. The remote likely has 8-10 button combinations used to move the patient’s head and foot sections. The remote is seen hanging on the side rail, and its cable appears intact.
• Motor System: Looking at the underside of the bed (below the chassis), linear actuator (motor) pistons that move the bed platform can be seen. The cable channels and connection points appear neat visually.
• Accessories: There are suitable socket inputs at the head end for attaching an IV pole.
• Quantity Information: The reported product consists of 1 hospital bed and its integrated components (rails, panels, remote control). Although other beds are seen in the same environment in the images, the analysis focuses on the main product.

Label and Mark Information

Upon examining the label details on the metal chassis of the bed in Image 4:

• Brand Logo: “NITROCARE” text in blue and green colors and the company symbol.
• Web Address: The inscription “www.nitrocare.com.tr” is readable.
• Warning Sign: On the left side of the label, there is an “!” (exclamation mark) inside a triangle. This is a standard safety warning that prompts the user to read the user manual or to be cautious about the risk of pinching.

Current Fault and Risk Analysis

Within the limitations of visual inspection, no error codes were detected on the device as there is no visible break (mechanical damage), severed cable (electrical damage), or a remote control with a display that would hinder its operation. The bed’s posture maintains its symmetry. However, the functionality of moving parts (rail mechanisms and motor pistons) cannot be verified solely by visual means. Visually, there is no serious rust or deformation that would pose a potential fault risk.

Measurements and Dimensions

The product is of standard adult hospital bed dimensions (estimated inner mattress size is around standard 90×190 cm or 90×200 cm). It is not a special width product for children or bariatric (obesity) types; it has standard hospital-type measurements.