Secondhand Platin PM 4000 4 Motors Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 15.12.2025

Electric Patient Bed and Equipment Analysis Report

Device Identification

The images show a motorized patient bed used for patient care in healthcare institutions or at home, with a patient mattress placed on it. The product is a medical bed with movable head and foot sections, wheels, and side rails. Additionally, in the frame, there is an IV pole at the head of the bed and a partially visible overbed table on the right side of the image.

Brand and Model

Patient Bed Brand-Model: No brand logo, model name, or label information that would identify the product is clearly visible on the metal frame, plastic components, or motor housings in the image. Therefore, brand identification could not be made with 100% certainty.

Patient Mattress Brand-Model: There is no logo or printing belonging to the manufacturer on the surface of the mattress on the bed frame.

Originality and General Condition

Visually, the product appears to comply with industrial standards, features neat molding, and its material quality reflects medical standards. The compatibility of the ABS-coated head and footboards with the side rails suggests that the product is factory-made and originally assembled. No visual defect (incompatible part, color difference) indicating it as an aftermarket or assembled product has been detected.

Areas of Use

This product is designed for use in the care of patients with mobility limitations, in hospital inpatient wards, intensive care units, or home care services. It is used to ensure patient comfort and lighten the caregiver’s workload through its height adjustment and back/foot section movements.

Quantity Information

• 1 electric patient bed frame
• 1 patient mattress
• 1 wired hand control
• 1 IV pole (positioned alongside the bed, not as a disassembled or separate piece resting on the furniture)
• 1 overbed table (partially visible on the right side)

Physical Deformations and Cosmetic Condition

The cosmetic condition of the device appears to be quite clean:

• Plastic Components: No visible breaks, cracks, yellowing, or deep scratches are present on the headboard, footboard panels, or side rails. The shades of white and gray colors are vibrant.
• Mattress: No signs of stains, tears, unraveling, or sagging (deformation) have been observed on the mattress surface. The quilted cover of the mattress is in clean condition.
• Metal Frame: No rust or paint peeling has been detected on the visible metal chassis parts.

Mechanical Components

• Side Rails: The bed features a four-piece independent (split) side rail system. The two rails at the head end are in the raised (locked) position, while the two rails at the foot end are lowered. These mechanisms appear sturdy and their parts are complete.
• Wheels: The bed’s lower chassis has four wheels. The wheels are clean, and brake mechanisms are visible on them.

Electronic Components and Battery

Hand Control: A spiral-cabled hand control is hanging on the right side rail of the bed. A multi-button combination is visible on the control (likely for back elevation, leg elevation, height adjustment, etc.). No wear or fading is visible on the membranes of the buttons.

Cables: A gray power cable with a plug end is seen laid out on the bed. No crushing or breakage is visible in the outer insulation of the cable. However, the cable resting on the bed in this manner indicates that the device is not currently connected to electricity.

Battery: From the images, it is not possible to determine if there is an internal battery or its condition if present.

Label Information

Technical labels, which are likely to be on the product’s chassis, under the motor, or on the side of the bed, are not visible due to the angle at which the photograph was taken. Therefore, Serial Number, Lot Number, REF code, or manufacturing year information could not be reported.

Dimensions and Compatibility

The product in the image is of standard patient bed dimensions designed for adult use (estimated 90×190 cm or 90×200 cm bed platform). The mattress fits perfectly into the bed frame; there are no excessive gaps or overhangs at the edges.

Potential Malfunction Risk

No mechanical or structural risk factors (such as bent metal, cracked plastic, etc.) are found in the images. However, the power cable lying casually on the bed serves as a reminder that the cable’s plug inputs and contact points should be checked before use. No serious malfunction risk is foreseen.