Secondhand Sesan HK-002 3 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 26.12.2025

Nitro Series 3-Motor Hospital Bed Analysis Report

Device Identification

The product in the examined visuals is an electrically motor-controlled hospital bed and a patient mattress placed on it, designed to provide comfort and position changes for patients in hospitals and home care settings. The product features equipment that allows for the movement of the patient’s head and foot sections and adjustment of the bed’s height from the floor.

Brand and Model Information

Upon examining the label on the foot end panel in the visuals, the designation Nitro and the description 3-Motor Hospital Bed are clearly legible as the product’s model or series name. Accordingly, the product has been identified as a Nitro series bed with 3 different motor functions. However, since the main logo of the manufacturer (e.g., Nitrocare) is not clearly discernible in the visuals, this series information on the label has been taken as the basis instead of the manufacturer’s brand name.

• Hospital Bed Brand-Model: Nitro Series 3-Motor Hospital Bed
• Patient Mattress Brand-Model: No brand logo or label is visible on the blue-covered mattress in the visuals.

Areas of Use

This device is suitable for intensive care units, patient wards, or patients requiring long-term care at home. The product facilitates treatment and care processes by performing functions such as raising the patient’s back section (for eating, respiratory support), raising the leg section (for blood circulation support), and lowering and raising the entire bed (for patient transfer and caregiver ergonomics).

Originality Status

The product’s chassis, ABS panels, railing mechanisms, and hand remote appear to comply with industrial standards. The bed’s structure and labeling indicate that it originated from a professional production line, and based on visual inspection, the product is deemed to be original.

General Condition and Quantity Information

The visuals show 1 hospital bed, with 1 mattress (pad) on it, and 1 hand remote control connected to the device. The device generally has a used appearance. Although there are superficial traces of use on the metal and plastic components, the product retains its integrity.

Physical Deformation and Cosmetic Inspection

• Side Rails: The foldable aluminum and wood-look side rails on both sides of the bed appear sturdy, but there is slight yellowing and signs of use on the plastics at the joint points.
• Headboard and Footboard Panels: The ABS corner bumpers and wood-look panels appear clean. However, there might be minor scuff marks on the plastic parts.
• Hand Remote: A sticky cloth or tape piece is present on the “Back Raise” function button in the upper left corner of the remote. This indicates that the coating on that button is worn or that an intervention has been made regarding the button’s sensitivity.
• Cables: Although bends are observed at the entry point of the remote cable into the bed, no breakage has been detected in the outer insulation.

Mechanical and Electronic Components

The technical details identified as a result of visual analysis are as follows:

• Motor System: The label information states “3-Motor”. These motors provide back movement, foot movement, and elevator (height) movement.
• Remote Control: An 8-button wired remote control is present. The buttons sequentially control the back raise/lower, foot raise/lower, and elevator (height) raise/lower functions. The other buttons at the bottom appear to be reserved for combined movements.
• Wheels: Some of the wheels that enable the bed’s mobilization are discernible in the visual, but the detailed condition of the locking mechanisms cannot be confirmed from the visual.

Accessories and Battery

The device includes the standard expected mattress. An IV pole is not present in the visual, but there are slots in the corners for attaching an IV pole. It cannot be determined by external inspection whether there is a built-in battery.

Label Information

The following information can be discerned on the label located on the foot end side panel:

• Series Information: Nitro … 3-Motor Hospital Bed
• Barcode/Code: A stock/serial code starting with the letter M (e.g., appearing as M07519) is present, but it cannot be fully read.

Existing Malfunctions and Potential Risks

Existing Malfunction: The adhesive tape on the upper left button of the hand remote, in addition to being a cosmetic flaw, indicates that difficulty might be experienced when using that button (back raise button) or that the button membrane might be punctured. This should be taken into consideration as it is the most frequently used button.

Potential Malfunction Risk: No serious rusting or broken parts have been observed. However, the tension at the connection point of the coiled remote cable may pose a risk of intermittent contact in the long term.