Secondhand Sesan HK-002 3 Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 23.12.2025

Detailed Analysis Report of Electric Hospital Bed and Mattress

Device Identification

The product examined in the visuals is a multi-functional, motorized hospital bed designed for use by patients requiring care in hospitals, nursing homes, or at home. The product consists of a main body with a metal chassis and a compatible patient mattress (cushion) positioned on it.

Originality

The general structure of the product, the materials used (ABS side rails, wood-look panels, wheel structure, and motor block integration), indicate that it is an original medical device manufactured according to industrial standards. It does not appear to be a handmade or assembled product.

Areas of Use

This bed is designed for patients with limited mobility, those who are bedridden, or those requiring long-term care. Thanks to its movable head and foot sections and height adjustment capability, it is suitable for use in intensive care units, patient wards, elderly care homes, and home patient care processes.

Quantity Information

In the visuals, there is a total of 1 electric hospital bed frame and 1 blue-covered patient mattress (cushion). The product is displayed as a single set.

General Condition and State

The general cosmetic condition of the product appears good and clean visually. No significant rust or paint peeling is observed on the metal parts. The white oven paint coating retains its vibrancy. The product gives the impression of being well-maintained and ready for immediate use.

Physical Features and Deformation Analysis

• Side Rails: On both sides of the bed, there are side rails made of ABS material, understood to be in a total of 4 pieces (split). Shock absorber mechanisms or movement buttons can be discerned on the rails. No breaks or cracks were detected on the rails in the visual.
• Head and Foot Panels: At the head and foot sections of the bed, there are panels with plastic/metal composite frames and a wood-patterned covering (laminate or similar) in the middle. These panels appear sturdy, and no deep scratches are observed on them.
• Corner Bumpers: At the four corners of the bed, there are blue plastic wheel bumpers for protection against impacts. The bumpers are complete.
• Chassis Structure: The metal profile chassis appears robust. A scissor lift system is present, which indicates that the height adjustment (elevator feature) of the bed is done via this scissor system.

Mechanical and Moving Parts

The moving parts of the product, such as the wheels, scissor system, and side rail hinges, appear sturdy in the visual. The wheels are observed to have grey rubber surfaces and a cross-lock mechanism (braked). No physical damage or deformation is noticed on the wheels.

Electronic Components

Beneath the bed, linear actuator (motor) systems that move the back and foot sections, and the main control box are visible. In the first visual, it is understood that the motors are actively positioning themselves while the bed is in motion (back upright, feet elevated).

Accessories and Connections

A white spiral cable leading to the motor is visible on the bed. This cable belongs to the handheld remote control that manages the bed’s functions. Although the remote control device itself cannot be clearly discerned in the visual, the presence of the connecting cable confirms that the control unit is present in the system. On the right head section of the bed, there is likely a slot or attachment for an IV pole.

Battery Status

Whether there is an internal battery within the motor control box cannot be determined by external observation. However, the body structure and the size of the control box resemble models that include a rechargeable battery option. A definitive comment regarding the battery’s presence or health cannot be made based on visual data.

Screen Analysis

There is no digital screen or indicator panel on the device. The control mechanism is via a wired remote control.

Mattress (Cushion) Condition

On the bed, there is a blue mattress, likely with a fluid-resistant (PU or PVC) cover. The mattress is designed with a contoured/laser-cut structure or in a multi-piece foam form to adapt to the bed’s movements. This contoured structure becomes clear when the mattress is folded in the first visual. No tears or significant stains are observed on the mattress surface.

Existing Faults and Potential Risks

No broken, detached, or non-functional parts of the product were found in the visuals. There is no crushing or breakage in the spiral cable. No signs of corrosion are observed on the metal parts. Based on the visual inspection, the product can be said to be in “Good” condition and is assessed to carry no significant potential fault risk.