Secondhand Turmed TM-D 4077 Dual Motor Patient Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

1766049966
Report date: 18.12.2025

Detailed Analysis Report of Electric Adjustable Hospital Bed

Device Detection and Identification

The examined images belong to a metal-framed hospital bed skeleton, operated by an electric motor system. The images show only the mechanical metal frame (chassis), side rails, headboard/footboard panels, and a wired hand remote control. A patient mattress (foam/mattress pad) is not present on the product. From the visuals, it is understood that the product is designed for hospital, clinic, or home patient care.

Brand and Model Information

During a detailed examination of the images, no logo, brand name, model code, or label indicating the manufacturer was found on the metal components, headboards, or hand remote control of the bed. The graphics on the remote control are general symbols merely indicating functions. Therefore, brand and model identification based on visual data has not been possible.

Technical Specifications and Functions

• Motor Type and Function: Upon examining the button combination and graphics on the hand remote control, it has been analyzed that the device is a 2-Motor system. The icons on the remote control indicate that the head and foot sections of the bed can be moved up/down independently.
• Side Rail System: On both sides of the bed, there are manually lockable side rails made of metal tube profiles, with an up-down sliding mechanism.
• Remote Control: An integrated, wired, 6-button hand remote control is present on the product. The remote control features directional arrows (blue) and schematic drawings showing the bed’s position.
• Wheels: There are a total of 4 wheels, one at each corner, with grey rubber coating, providing mobility. Although the braking mechanisms cannot be clearly distinguished from the visuals, they appear to be standard medical wheel structures.

Areas of Use

This product is suitable for use in home care services, nursing homes, and basic medical care facilities, with the aim of facilitating the care process for patients with limited mobility. It increases patient comfort and lightens the workload of caregivers by enabling the patient to assume a sitting position or have their feet elevated.

General Condition and State

According to the data obtained from the visuals, the physical condition of the product is as follows:

• Cosmetic Condition: No visible deformation, rust, deep scratches, or paint chipping has been detected on the white paint of the bed frame. The product has a “new” or “very lightly used/refurbished” appearance. Metal surfaces are shiny and clean.
• Headboard and Panels: A wood-patterned (light oak tones) panel attachment is visible at the head end of the bed. This panel is undamaged and clean.
• Mechanical Components: No bending or broken parts are seen on the metal slats (the grids where the mattress is placed), side rail bars, or connection points. The grey plastic connecting accessories appear complete and robust.

Accessories and Missing Parts

• Present Accessories: 1 wired hand remote control.
• Mattress Condition: Only the bed frame is present in the images; the patient mattress (foam/air mattress) is not present on the product. The buyer will need to acquire a mattress separately.
• IV Pole: There may be slots for an IV pole at the corners of the bed, but no IV pole is attached in the visual.

Electronic Components and Cabling

The coiled cable of the hand remote control appears intact, with no signs of crushing or breakage. The button panel is clean, its icon prints are not erased, and it is in a readable condition. As the motor block is located under the bed and not directly in the visual field, no comment can be made regarding the physical condition of the motors.

Quantity Information

The focus product analyzed in the visual is 1 unit of a hospital bed frame and its associated 1 unit of hand remote control. Other devices seen in the background have been excluded from the analysis.

Conclusion and Evaluation

The examined hospital bed frame is visually clean, well-maintained, and in near-new condition. It is a standard model that fulfills basic functions with 2 movements (head and foot sections). It shows no signs of mechanical or physical damage. The product is an unbranded (or visibly unbranded) standard production model, and it is considered a complete unit with its frame and remote control system, excluding the mattress.