Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 25.12.2025
Antano Group Ulisse Patient Transfer Lift Analysis Report
Device Identification
The product examined in the visuals is a mobile, electric motor-driven patient transfer lift designed to safely transfer patients with limited mobility or those who are bedridden. The device consists of a wheeled chassis, a lifting main body (boom), a control unit, a lifting hanger attachment, and a “sling” (transfer cloth) that holds the patient.
Brand and Model Information
The writings and logos on the product have been examined in detail, and the following brand-model information has been identified with 100% certainty:
- Patient Transfer Lift Brand-Model: On the main chassis, on the vertical body, the “ANTANO Group” brand is displayed with blue letters. On the lower leg section, the model name “ULISSE” is clearly legible.
- Motor/Control Unit Brand-Model: The “DEWERT” logo is found on the beige colored electronic control box (actuator box) mounted on the main body of the device. This unit also manages the motor and the battery.
- Remote Control Brand-Model: The wired hand remote control is part of an integrated set with the control unit, and its symbols and structure belong to the DEWERT system.
Originality
The brand prints on the product, the font characteristics of the “ANTANO Group” and “ULISSE” logos, the device’s conformity to industrial design, and the use of parts from original component suppliers known in the sector, such as “DEWERT”, indicate that the product is an original Antano Group production.
Areas of Use
This device is designed for use in hospitals, nursing homes, or home care services. Its primary function is to transfer patients who have lost the ability to walk or are severely ill from bed to wheelchair, wheelchair to bed, or to the toilet, without requiring physical strength from the caregiver. The device transports the patient by suspending them via the transfer cloth (sling).
Quantity Information
The visuals show 1 patient transfer lift (main device) and 1 patient transfer sling attached to the device. In total, 1 set of products is present.
General Condition
The device generally has a used (second-hand) appearance. Although the main metal components appear sturdy, there are signs of use that have developed over time, especially on the electronic control unit and plastic parts. The cosmetic condition of the device is moderate.
Physical Deformations and Cosmetic Examination
The physical details identified on the device are as follows:
- Control Unit (White/Beige Box): Significant yellowing is present on the unit. Especially on the middle and lower parts of the box, old tape marks, adhesive residues, and dirt accumulation are noticeable. This section is cosmetically worn.
- Metal Body: Deep rust or large dents are not visible in the visuals on the white-painted metal chassis, but small superficial stains due to use may be present.
- Cables: The cables emerging from the bottom of the control unit are seen to be slightly exposed at the point where they join the unit’s bottom cover.
Mechanical Components
The condition of the mechanical parts from a visual perspective is as follows:
- Wheels: There are 4 wheels under the device. A braking mechanism is visible on the rear wheels. The wheels appear sturdy.
- Hanger Attachment: The hooks and hanger bar on the upper boom section appear complete.
- Pedal Mechanism: A manual pedal mechanism, used to adjust the angle of the legs, is present on the rear lower part of the chassis and is in place.
Electronic Components and Battery Status
The visual analysis of the electronic system is as follows:
- Control Box: The DEWERT branded box contains the battery and motor driver. It has a red “Emergency Stop” button.
- Battery Warning: The label on the box contains the warning “Notice! The accumulator must be loaded not later than 6 months after production date and/or after 6 months of storage”. This indicates that the device is battery-powered (rechargeable). The internal capacity or charge retention performance of the battery cannot be determined from the visual, but the warning on the label emphasizes the criticality of battery maintenance.
- Hand Remote Control: A wired hand remote control is present. It has up and down directional buttons.
Accessories
The following accessories have been identified on the device:
- Transfer Cloth (Sling): One grey, fabric-made transfer cloth is hanging. The connecting straps of the cloth appear sturdy. Excessive tears or unraveling on the fabric cannot be discerned from the visual, but it is a used product.
- Charging Cable: The presence of the charging cable plugged into the electrical outlet of the device cannot be clearly discerned in the visuals; the cables hanging from the control unit are motor and remote control connection cables. The status of an external power cord is uncertain.
Label Information
The technical and warning labels read on the device are as follows:
- Capacity: The phrase “MAX WEIGHT KG 180” is located on the upper boom. This indicates that the device has a maximum load capacity of 180 kilograms.
- Warning Label: A blue/white warning label reminding about the battery charging period is present on the control box, with the headings “Achtung!” in German and “Notice!” in English.
Potential Risk of Malfunction
No serious risk is observed in the main mechanical structure of the device. However, the cosmetically worn condition of the control unit (DEWERT box) and the tape residues on it may suggest that this part has undergone past intervention or was taped to secure the battery cover. Furthermore, slight openings are noticeable at the cable exits on the lower part of the control unit; this situation could pose a risk of cable intermittence. The batteries may have reached the end of their lifespan.
Dimensions and Compatibility
The product, with its “ULISSE” model and 180 kg capacity, is a standard-sized lift system designed for adult patients. As far as can be understood from the visuals, it has wheel height capable of fitting under hospital-type beds.
