Secondhand Invacare Birdie EVO Patient Lift

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 09.01.2026

INVACARE Birdie EVO 180 kg Patient Hoist Analysis Report

Device Identification, Brand and Model Information

As a result of the detailed visual inspection, the device shown has been identified as a wheeled, electrically motorized Patient Hoist designed for the transfer of individuals with limited mobility. The brand and model indications on the device are clearly legible.

• Patient Hoist Brand-Model: INVACARE Birdie EVO (The inscription “BIRDIE EVO 180 kg” and INVACARE logo are present on the boom arm).
• Battery Brand-Model: The battery unit appears integrated with the control box. In the visuals, a separate manufacturer’s brand (Linak etc.) independent of the device brand is not legible on the battery case.
• Motor (Actuator) Brand-Model: The lifting motor is integrated into the main body of the device. The brand and model cannot be specified as the motor’s label information is not legible from the visual angles.
• Remote Control Brand-Model: A wired hand remote control is present with the device. A clear inscription indicating the brand on the remote control is not visible in the image.

Areas of Use and Purpose

This product is used to ensure the safe transfer of patients with limited mobility or elderly individuals between a bed, wheelchair, or floor. It is suitable for use in areas such as home care, hospitals, and rehabilitation centers. Thanks to the carrying sling hanging on the device in the visual, the patient is lifted and transported in a sitting position.

Visual Condition, State and Originality

The general appearance of the device is in very good and nearly new condition. There are no noticeable signs of use, scratches, rust, or deformation on the product. The metal chassis, plastic coatings, and paint condition are quite clean. The presence of original labels, warning signs, and the logo indicates that the product is original and has an untouched, integral structure.

Physical and Mechanical Component Analysis

The mechanical parts of the product appear sound and functional:

• Body and Chassis: The grey lower chassis and white/grey upper boom arm of the device appear problem-free. Pedals (manual foot pedals) for the leg opening/closing mechanism are present at the rear of the chassis.
• Wheels: There are a total of 4 wheels. Grey colored brake pedals are present on the two rear wheels. The front wheels are in a dual (double) structure. The wheels’ contact with the ground is smooth.
• Spreader Bar: A spreader bar with 2-point connection is attached to the end of the boom arm. No damage restricting its rotation capability is visible.

Electronic Components and Battery Status

The device’s electric lifting system is clearly visible in the visuals. The following details regarding the electronic components have been identified:

• Control Box: The control box and battery unit mounted on the mast are in a clean condition. A red Emergency Stop Button is present on the box, which serves to cut off electricity in emergencies.
• Hand Remote Control: The coiled-cable hand remote control, which controls the device, is hanging on the right handle. No breakage or crushing has been detected in its cable.
• Battery Status: A removable battery box is visible on the device, but the battery’s charge status or level cannot be determined from the visual. There is no deformation such as swelling or leakage on the battery’s outer casing.

Accessories and Quantity Information

In addition to the main unit, the following parts have been identified in the visuals. The total set content is as follows:

• 1 Unit Invacare Birdie EVO 180 kg Main Unit.
• 1 Unit Patient Lifting Sling: A grey fabric model with yellow edge strips (piping) and back support. Its connecting straps and stitching appear sound; there are no tears or rips.
• 1 Unit Hand Remote Control (Connected to the device).
• 1 Unit Quick User Guide / Information Card (Hanging on the device).

Label Information and Technical Data

The information card hanging on the device, which has detailed (close-up) shots in the visuals, contains the following technical data and warnings:

• Lifting Capacities:
  • Birdie EVO COMPACT: 150 kg
  • Birdie EVO: 180 kg (The device examined has this capacity).
  • Birdie EVO PLUS: 180 kg
  • Birdie EVO XPLUS: 210 kg
• Usage Instructions: Operations such as battery charging, use of the emergency stop button, how to attach the patient sling to the spreader bar (correct and incorrect methods), folding mechanism, and leg opening are explained with visuals.
• Document Date: The code “1650068-C 2019-09-09” is located at the bottom of the card. This date is the revision date of the document, but it indicates that the probable manufacturing year of the device is 2019 and later.
• Certification: The “CE” mark is present on the card.
• Origin Information: The inscription “Invacare International GmbH” is present.

Current Fault and Risk Analysis

As a result of the visual analysis, no current fault such as broken parts, cracked body, severed cables, or error warnings that would impede use has been detected on the device. The cosmetic and structural integrity of the product has been preserved.

Potential Risks: Since the device can be evaluated as second-hand, it should be considered that the battery life (condition of the battery cells) cannot be determined from the visual. Furthermore, although residues like hair/dust accumulated on the wheels are not visible in the image, periodic maintenance of mechanical moving parts is recommended.