Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 04.05.2026
Report code: 1777878204
Sesan HL-003 Patient Lift Analysis Report
Device Identification
The product in the images is a wheeled, motorized patient lift used to facilitate the transfer of bedridden patients or those with limited mobility.
Brand and Model Information
- Patient Lift Brand-Model: Sesan HL-003
- Motor Brand-Model: Could not be identified from the images.
- Battery Brand-Model: Could not be identified from the images.
- Remote Control Brand-Model: Could not be identified from the images.
General Status and Condition
The general condition of the device appears to be used. There are paint chips, scratches, and scuff marks on the metal frame, particularly on the base sections and connection points. Soiling and wear due to usage are also visible on the plastic components and wheels. The mechanical structure of the device maintains its integrity.
Physical and Mechanical Component Analysis
There are widespread scratches and paint deformations on the blue-painted metal chassis. All four wheels are in place and dirty. A braking mechanism is visible on the rear wheels. A pedal for opening and closing the base is present. The patient lifting arm (boom) and spreader bar are in place. The black plastic grips on the push handles appear to be intact. The linear actuator (motor) that performs the lifting operation is mounted on the chassis. No broken or missing parts were visually detected in the mechanical components.
Electronic Components and Battery Status
The control unit of the device is mounted on the main mast. There is a red emergency stop button and a screen on the control unit. The wired hand remote is connected to the control unit, and its spiral cable appears to be intact. The device’s external battery and charging station are present. The battery attached to the charging station shows a 100% charge status in green on its screen. There is wear and fraying on the fabric strap used as a carrying handle on the top of the battery pack. The charging adapter and power cable are included as a set.
Accessories
A green patient transfer sling is seen with the device. The sling’s suspension straps are attached to the spreader bar. Additionally, an external battery, charging station, and charging adapter are present.
Label Information
The information on the white label located on the device body is as follows:
- CR75608
- MBOIA6ZFU12
- ST06268
- Second-hand Patient Lift Sesan HL-003
- There is a handwritten “Sesan” inscription and a blue circular sticker on the label.
Screen Analysis
The text “100%” and a full battery icon are visible on a green background on the charging station screen. This indicates that the battery is fully charged. The status of the screen on the control unit cannot be clearly understood from the images.
Existing Faults and Potential Risks
There is no clear evidence of a malfunction, such as a broken part or an error message, that would prevent the device from operating in the images. However, the wear and fraying on the battery pack’s carrying handle may pose a risk of dropping the battery during transport. The paint chips and scratches on the body are aesthetic defects and may indicate the onset of corrosion. The general condition of the device is worn due to usage.
