Secondhand Sesan HL-010 Patient Lift

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 03.09.2025

Patient Transfer Lift Analysis Report

General Assessment

The product shown in the images is a wheeled patient transfer lift. The product generally appears to be in near-new or very lightly used condition. No significant wear and tear was observed on its metal components or paint. It is understood that the product is used for the safe transfer of individuals with limited mobility from one place to another. In total, there are two main parts: one patient transfer lift and one transfer sling.

Brand and Model Information

Detailed inspections revealed that the brands of different units of the device may vary. The specific information obtained from the images is listed below.

• Motor and Control Unit Brand-Model: The inscription Jiecang JB8US is clearly readable on the label located on the device’s electronic brain and battery unit.
• Patient Transfer Lift Brand-Model: No brand or model information was found on the main chassis or frame of the lift.
• Remote Control Brand-Model: No brand information was detected on the handheld remote control.

Physical and Mechanical Condition

No adverse conditions were detected in the physical and mechanical components of the device.

• Chassis and Body: There are no deformations such as scratches, dents, rust, or color fading on the white metal body. The paint is in very good condition.
• Mechanical Parts: The lifting arm, connection points, and hinges appear to be in good working order. There is no visible problem with the mechanism used to adjust the chassis width.
• Wheels: All four wheels are in place and in good physical condition. The brake (locking) mechanisms on the rear wheels appear to be sturdy.
• Transfer Sling (Sling): The blue transfer sling is clean and shows no tears or unraveling.

Electronic Components and Accessories

The device’s electronic components and accessories are visually complete and undamaged.

• Control Unit: The plastic casing of the Jiecang JB8US model control unit is intact. The buttons, emergency stop button, and small LCD screen (in off state) show no signs of damage.
• Handheld Remote Control: One wired handheld remote control is provided with the device. The symbols on the remote’s buttons are clear, and no breaks or kinks are observed in its cable.
• Battery: The battery is internally located within the control unit. From the images, it appears there is no swelling, leakage, or physical deformation.
• Socket and Cables: The socket connecting the remote control cable to the control unit and the cable itself are generally in good condition.

Label and Technical Specifications

The following information can be read on the label located on the Jiecang JB8US model control unit:

• Model: JB8US
• Product Code (ITEM): JCB35M-B
• Input Power (INPUT): DC 24V 8A
• Duty Cycle (DUTY CYCLE): 10% MAX. 2min/18min (Must be operated for a maximum of 2 minutes, followed by 18 minutes of rest)
• Protection Class (IP): IPX6
• Specific information such as Serial Number, Lot Number, and REF Code was not found in the current image of the label.

Fault Detection and Potential Risks

There are no indications of a faulty device (broken part, error message, deformation) in the images. Due to the product’s high overall condition, its paint and mechanical parts appearing new, and the absence of any rust or significant wear and tear, the potential risk of malfunction is assessed as low. The impression gained is that the device is well-maintained and ready for use.