Secondhand Strok R1 Patient Lift

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 25.08.2025

Patient Transfer Lift Analysis Report

Overview and Device Description

The product shown in the images is a patient transfer lift designed to safely transfer individuals with limited mobility from one place to another. The device consists of a wheeled chassis, a vertical support column, a lifting arm, a control unit, and a sling section where the patient is transported. The product’s application areas include home care services, hospitals, and rehabilitation centers. A total of 1 patient transfer lift and its accessories are present in the images.

Brand and Model Information

During the examination of the device, brand and model information is clearly legible on the control unit’s label. As the product is a patient transfer lift, its relevant components have been examined separately.

• Motor Brand-Model: Brand and model information could not be determined from the images.
• Controller Brand-Model: Brand and model information could not be determined from the images.

The label on the product, the CE mark, and the quality of workmanship indicate that the device is original.

General Condition and State

The general condition of the device is assessed as good and lightly used. No significant wear and tear has been observed on its blue metal frame or white plastic components. The “QC PASSED” label on it indicates that the product has passed the quality control process. Overall, it has a clean and well-maintained appearance.

Physical Deformation

Upon detailed examination of the lift’s surfaces, no noticeable serious scratches, dents, cracks, or discoloration are present. No breaks or deformations have been detected in frequently used areas such as the wheels and handles. The product may have slight signs of use overall, but its physical condition appears to be very good based on the photographs.

Mechanical and Electronic Components

Mechanical parts such as the wheels, chassis, and lifting arm are visually in good condition. The wheel locking mechanisms are in place. The casing of the electronic control unit is intact, and the buttons on it (up, down, emergency stop) are physically in good condition. The wired hand control and its coiled cable connected to the control unit appear sound. The small digital screen on the device is observed to be working, but the information on the screen is not clearly legible.

Accessories

The following accessories belonging to the device have been identified in the images:

• Wired Hand Control: The control used to operate the device’s lifting and lowering functions is connected to the device and is in good condition.
• Transfer Sling: The fabric-based sling, into which the patient is seated for transfer, is seen with a user in the images and is in usable condition.

An external adapter or cable used for charging the device is not present in the images.

Label Information and Technical Specifications

The following technical information is clearly legible on the label located on the control unit:

• Lifting Capacity: Maximum 135 kg
• Serial Number (Prod.-seria): 2018050401
• Production Date (Date): 2018-05-24
• Input Power (Input): DC24V 2-8A

Potential Failure Risk

Based on the examination of the images, no obvious wear, rust, crushed cables, or significant damage to its casing, which could pose a potential failure risk, has been observed in the product. As the device’s mechanical and external components are in good condition, no imminent failure risk is anticipated based on visual evidence.