Secondhand Strok R1 Patient Lift

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 19.12.2025

Patient Transfer Lift and Equipment Analysis Report

Device Identification and Product Description

The product in the examined visuals is a mobile patient transfer lift that enables the safe transfer of mobility-impaired patients or elderly individuals from one place to another (e.g., from bed to wheelchair). The product consists of a wheeled metal chassis, a vertical main mast, a boom (arm) for lifting, an electronic motor system, a control unit, and a textile sling apparatus to carry the patient.

Brand and Model Components

As a result of detailed examination in the visuals, the following information has been identified for the different components of the device:

• Patient Transfer Lift Brand-Model: No logo, brand name, or model designation belonging to the manufacturer is visible on the metal body (chassis and mechanical parts) of the product in the visuals. Therefore, the brand of the lift’s mechanical body cannot be specified based on visual data.
• Battery/Control Box Brand-Model: The BIBUS brand is clearly visible on the electronic control unit. According to the label information, the Model number has been identified as JCB35K2-2-G-24-24-02-V2.
• Motor (Actuator) Information: Although there is no close-up shot directly showing the motor’s label in the visuals, the label on the control box states that the manufacturer is “Zhejiang Jiecang Linear Motion Technology Co., Ltd.” and that this unit is “Produced for BIBUS”. It is understood from the system’s integrity that the motor is also a linear actuator of the same origin.
• Remote Control Information: No brand or model name is visible on the wired handheld remote control connected to the device, but it has been observed to have a standard design with a gray surface and two buttons.

Label Information and Technical Details

The control box (BIBUS) label has been examined in detail, and the following technical data has been reported:

• Model: JCB35K2-2-G-24-24-02-V2
• Input Power (Input): DC24V, 4.4Ah
• Output Power (Output): 24V = 7A
• Duty Cycle: 10% (Maximum 2 minutes operation / Minimum 18 minutes rest time)
• Production Date (Prod. date): Based on the code 20180608-043, the product’s production year has been definitively identified as 2018 (6th month, 8th day).
• Other Codes: Reference number O.C.996880 is present on the label.
• Quality Control: A blue circular “QC PASSED” label is on the unit.
• Certification: The CE mark is present on the label.

General Condition and Physical State

The overall condition of the product is evaluated as “used”. There are noticeable deformations on the metal parts and paint due to use.

Physical Deformations:

• Leg and Chassis Section: The blue painted metal leg sections of the lift, which are in contact with the ground, show numerous paint chips, scratches, and impact marks. These deformations, visible as white spots, indicate that the device has been actively used and exposed to physical contacts (door thresholds, furniture bumps, etc.).
• Boom (Lifting Arm): Minor scratches are also observed in places on the upper metal arm.

Electronic and Mechanical Component Condition:

• The plastic casing of the control box appears intact, although the white plastic is somewhat dirty or has slightly discolored over time.
• The red “Emergency Stop” button is physically in place and appears sturdy.
• The spiral structure of the cables retains its form; no noticeable breakage or crushing has been detected in the visual.
• The LCD screen glass is intact.

Accessories and Quantity Information

The total components identified in the visuals are as follows:

• 1 Unit Mobile Patient Transfer Lift Body (Including wheeled chassis, motor, and piston)
• 1 Unit BIBUS Brand Control Unit and Battery Block (Mounted on the lift)
• 1 Unit Wired Handheld Remote Control
• 1 Unit Transfer/Support Sling – Blue with red stripes

While no tears are visible on the transfer sling, the integrity of the seams should be physically checked for safety. The overall integrity of the fabric is preserved in the visual.

Areas of Use

This device is designed for use in hospitals, rehabilitation centers, nursing homes, and home care services. Its primary uses include:

• Transfer from bed to wheelchair.
• Lifting from the floor to a bed or chair.
• Toilet or bathroom transfers (with appropriate sling).

The product in the visual has a hooked spreader bar compatible with standard patient transfer slings.

Screen Analysis

A small LCD screen is present on the control box. Since it is unclear whether the device was turned on at the time the visual was taken, no error codes, charge percentage, or numerical data are visible on the screen. However, the presence of this screen indicates that the user can digitally monitor the battery level or system status.

Current and Potential Risk Assessment

No clear evidence (such as broken parts, screen error messages, etc.) indicating that the device is “faulty” is found in the visuals. However, the following points are noteworthy:

• Extensive paint loss on the metal legs may require examination for metal fatigue or rust risk (active rusting is not visible in the image, but unpainted surfaces are prone to it).
• Since the production date is 2018, if the battery cell has not been replaced since then, the battery may have reached the end of its life or its capacity may have decreased. Whether the battery holds a charge cannot be determined from the visual; this could indicate a maintenance need for the buyer.

Documents and Originality

No invoice, user manual, or warranty certificate for the product is present in the visuals. However, the technical labels, serial numbers, and production codes on it attest to the originality of the electronic components, manufactured by BIBUS / Jiecang, and their compliance with industrial standards (CE). Considering the production year (2018), it can be stated that the product’s warranty period has expired.