Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 05.09.2025
Vita V12 Bedside Patient Monitor Analysis Report
Overview and Device Description
The device shown in the visuals is a Vita V12 model bedside patient monitor used for monitoring patients’ vital signs. The analysis was conducted based on the three provided visuals, and the report relies solely on concrete data identifiable in these visuals. It is understood that the device is used for patient monitoring in medical environments.
- Product Quantity: 1 unit Vita V12 Bedside Patient Monitor.
- Accessories: A power cable and a metal mounting bracket are observed connected to the device. Patient connection accessories such as an ECG cable, SpO2 probe, or blood pressure cuff are not present in the visuals.
Brand, Model and Authenticity
On the front panel of the device, the Vita brand is clearly visible in the lower left corner and the V12 model number in the upper right corner. The product’s casing, screen interface, keypad, and logo print quality give the impression that it is an original device.
Physical Condition and State
Although the monitor is used, its general physical condition is observed to be good. The device’s casing has an entirely clean appearance. Other than a small, superficial scratch near a screw hole on the side panel, no notable deformation is present. No cracks, fissures, or discoloration were detected on the screen, carrying handle, or the device in general.
Technical and Functional Analysis
The fact that the device’s screen is on and actively displaying data indicates that its basic electronic components are in working order. Physical buttons such as “Reset” and “Stop” are present on the front panel, along with icons for “Pause”, “Record”, “NIBP”, “Menu” functions, and a rotary control knob. On the side of the device, there are special socket inputs for connecting various sensors. These inputs are:
- ECG
- T1 (Temperature 1)
- T2 (Temperature 2)
- SpO₂ (Oxygen Saturation)
- NIBP (Non-invasive Blood Pressure)
Screen Data and Observations
At the time of analysis, the monitor’s screen actively displays instant measurement values and waveforms for various vital parameters. The main data read on the screen are as follows:
- HR (Heart Rate): 145 bpm (observed to be above the set alarm limit of 50-120)
- SpO2 (Oxygen Saturation): 100%
- PR (Pulse Rate): 89 bpm
- NIBP (Blood Pressure): The last measured value is observed to be 160 mmHg
- Temperature (T1 and T2): 36.0 °C
Additionally, signal waveforms belonging to multiple ECG (Electrocardiography) derivations (I, II, III, aVR, aVL, aVF, V) are clearly visible on the screen.
Potential Risk Assessment
No serious physical damage, crushed cables, rust, or severe wear and tear that could jeopardize the device’s functionality were observed in the visuals. The small scratch on the side panel is a cosmetic flaw and does not appear to be of a nature that would affect the device’s operation. The fact that the device is in working condition indicates that it has the potential to provide service in its current state.
