Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 24.03.2026
Report code: 1774334684
ELCON Medical Saw Analysis Report
Device Identification and Brand Information
The product shown in the images is a handheld motorized medical saw. Based on the label on the device body and the laser engravings on the saw blade, its brand has been identified as ELCON. No specific model name is present on the main body.
Areas of Use
This device is used in orthopedics for plaster cutting procedures or in pathology and autopsy departments for bone cutting. The circular saw blade at the tip of the device is designed to cut hard tissues and medical materials.
Quantity Information and Accessories
The images show 1 main body of a medical saw and 1 circular saw blade mounted on the device. A power cable entering the body from the upper rear part of the device is visible. No external box, spare parts, or additional accessories are present in the images.
General Condition and Physical Deformation
The device is in used condition. Superficial scratches and slight friction marks are present on the black main body. Noticeable dirt, dust, and stains have been observed on the gray neck part. No cracks, dents, or missing parts have been detected on the outer casing of the device.
Mechanical and Electronic Components
The mechanical integrity of the device appears sound. The circular saw blade is securely fixed onto the rotating shaft with the help of a hexagonal nut and a metal washer. A sliding switch for adjusting the device’s rotational speed is located on the body. The metal screws holding the body parts together are in place and show no signs of rust. The internal electronic components of the device are not visible as it has a closed casing.
Labels and Technical Information
The inscriptions and technical details found on the device body and blade are listed below.
- Brand Label: ELCON MEDICAL INSTRUMENTS GmbH
- Speed Level Label: Under the inscription Stufe [min-1], 6 different speed levels and their RPMs are specified. 1: 6500, 2: 10000, 3: 14000, 4: 18000, 5: 22000, 6: 24000.
- Engravings on the Blade: ELCON 400-461-1 CE, Stainless Germany 01250.
- Code on the Body: The numbers 15116 are engraved on the black plastic protrusion next to the speed adjustment knob.
Originality Assessment
Considering the print quality of the labels on the device, the regular laser engravings on the blade, the CE certification mark, and the origin-indicating inscriptions, the product is assessed to be original.
Potential Malfunction Risk
The general condition of the device is good. No clear mechanical malfunction or breakage that would prevent the device from operating has been detected in the images. Dirt accumulated on the gray neck part and around the blade connection nut, if not cleaned, may lead to friction in the rotating components in the long term. Based on its general structure, the device has been observed to be in a suitable condition for use.
