Secondhand Nonin 7500FO MRI Compatible Console Type Pulse Oximeter

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 04.09.2025

Nonin 7500FO Pulse Oximeter Analysis Report

General Assessment

The visuals show one Nonin 7500FO model pulse oximeter device and its accessories, complete with its original packaging. The device itself and its accessories appear to be in their protective plastic bags, in an unused or near-new condition. It is understood that the product is used to measure blood oxygen saturation (%SpO2) and pulse rate. The labels on the device and its packaging strongly support that the product is original. Although there are some wear and tapes on the outer cardboard box, the condition of the products inside is excellent.

Brand and Model Identification

On the front face of the device, the Nonin brand and 7500FO model number are clearly visible. The same brand and model information is confirmed on the product’s outer box label as “MODEL 7500FO PULSE OXIMETER”. This information definitively confirms that the product’s brand is Nonin and its model is 7500FO.

Area of Use

The Nonin 7500FO is a tabletop pulse oximeter. Such devices are used to instantly monitor patients’ blood oxygen levels and heart rate. The “FO” (Fiber Optic) designation and “MR Conditions” warning found on the product and its box label indicate that this model is specifically designed for use in MR (Magnetic Resonance) environments. The fiber optic sensor structure prevents radio frequency burns and image distortions that may occur during MR imaging.

Package Contents and Quantity Information

The products shown in the visuals are listed below:

• 1 Nonin 7500FO main unit
• 1 power adapter and power cable
• 1 fiber optic sensor interface cable (black, coiled)
• 1 finger sensor (with Nonin logo, in separate bag)
• User manual and various documents
• 1 original cardboard box

Physical Condition and Deformations

The physical condition of the device and its accessories is very good. No scratches, cracks, dents, or discoloration are observed on the main unit’s casing. All accessories are in their original packaging and appear unused. The screen surface is clean and flawless. The outer cardboard box is slightly worn during storage or shipping, with additional tape and a small stain on one corner. However, this condition has not affected the products inside.

Mechanical and Electronic Components

All mechanical parts such as buttons, sensor connection port, and ventilation grilles on the device are undamaged and clean. No issues have been detected in the visible parts of the electronic components. Since the device is turned off, whether the screen is working cannot be visually confirmed, but there is no physical damage on the screen panel. The locations of indicators such as “%SpO2”, pulse, and battery level are clear on the screen.

Technical Label Information

The following information can be read from the label on the product’s outer cardboard box:

• Model: MODEL 7500FO
• REF Code: 8501-001
• Serial Number (SN): 505986670
• Other Codes: The label contains a CE 0123 mark and a barcode number as “(01) 0 833166 009767 (11) 221028 (21) 505986670”. The “(11) 221028” code here likely indicates a production date of October 28, 2022. “KARUN HEALTCARE_2025” is handwritten on the box.

Potential Risk Assessment

There are no indications of any existing malfunction or damage to the product in the visuals. The fact that the device and its accessories are unused significantly reduces the risk of potential malfunctions. The presence of all parts in their original packaging and in clean condition suggests that the device is well-preserved and ready for seamless operation. The minor deformations on the outer box are not expected to pose any risk to the device’s functionality.