Secondhand Oxisense BTO-100CXX Console Type Pulse Oximeter

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 08.09.2025

Pulse Oximeter Device Analysis Report

Overview and Product Description

The images display a medical monitor used in healthcare settings. The “SpO2” and “Pulse” indications on the device’s screen show that the product is a pulse oximeter that measures blood oxygen saturation and pulse rate. The “Newborn” icon located at the top of the screen indicates that the device has a special measurement mode for neonatal patients. The purpose of the product is to monitor patients’ vital signs.

In total, there is 1 (one) main device shown in the images. No accessories are present.

Condition and Status Assessment

The device is generally in new or very lightly used condition. No physical deformations such as scratches, dents, cracks, discoloration, or dirt were observed on its outer casing. The device’s plastic components, control knob, and buttons appear clean and undamaged. The green LED light on the front panel being on and the screen being active indicate that the device’s electronic components are functioning. The overall condition of the device is very good.

Screen Analysis and Observations

The device’s color digital screen is functioning without issues. No scratches or dead pixels were detected on the screen. The image quality is clear. The key information and warnings on the screen are as follows:

• Warning Message: A yellow warning band at the top of the screen displays the message “SPO2 No Cable”. This is an informational message indicating that the SpO2 probe, which is necessary for measurement, is not connected to the device.
• Patient Mode: In the upper-left corner of the screen, there is an icon indicating that the device is operating in “Newborn” mode.
• Monitored Parameters: The screen contains areas where SpO2 (oxygen saturation), PR (pulse rate), and PI (perfusion index) values are monitored.
• Date and Time: The current date and time information, “2025-05-20 02:02 AM”, is visible in the upper-right corner.
• Battery Status: Next to the date information, a battery icon indicates that the device has an internal battery and its charge is full.
• Menu and Controls: Touch control buttons such as “Alarm Silence”, “Alarm Reset”, “Screen Setup”, “Event”, and “System” are located at the bottom of the screen.

Accessories and Connection Ports

Apart from the device itself, no accessories such as a box, power cable, or measurement probe are visible in the images. The warning message on the screen also confirms the absence of the SpO2 cable. On the front of the device, there is one probe connection port labeled “SpO2”. This port is physically clean and undamaged.

Potential Risk Assessment

During the visual inspection, no potential fault risks that could negatively affect the device’s operation were found. There is no visible wear, rust, or damage on the casing or connection points. The overall condition of the device supports long-term and trouble-free use. The SpO2 probe cable, necessary for the device’s use, needs to be procured; this is a deficiency, not a fault.