Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 15.01.2026
Medlab NANOX 2 Handheld Pulse Oximeter Device Analysis Report
Device Detection and Identification
The examined visuals show a handheld measuring device suitable for medical use and a compatible sensor accessory. The device’s design, keypad structure, and the type of accessory attached (finger probe) indicate that it is a Pulse Oximeter, which measures blood oxygen saturation (SpO2) and pulse rate.
Brand and Model Information
A detailed examination of the device’s front panel clearly identified the following information:
- Brand: Medlab
- Model: NANOX 2
The device’s brand logo and model name are clearly and legibly located at the bottom of the panel. The accessory cable’s socket structure also indicates compatibility with this model.
Authenticity and Origin
The device’s front panel, the print quality of the keypad, logo placement, and the unique structure of the accessory connection socket give the impression that the product is an original item belonging to the Medlab company. No signs of aftermarket or replica products were observed.
Areas of Use
Medlab NANOX 2 is used for non-invasive measurement and monitoring of patients’ arterial oxygen saturation (SpO2) and pulse rate. Due to its portable nature, it is suitable for use in:
- Hospital wards and emergency departments,
- Ambulances and patient transport processes,
- Home care services,
- Post-anesthesia and intensive care monitoring.
Quantity Information
A total of 2 pieces of product are visible in the visuals:
- 1 Medlab NANOX 2 Pulse Oximeter main unit.
- 1 SpO2 finger probe (sensor).
General Condition and State
The product is a used device, but its general condition appears good visually. No signs of severe wear are noticeable on the device casing. Icons and text on the keypad are not faded and can be read clearly. Although very slight, unnoticeable tone changes due to use (inherent to cream/gray color) might be present in its colors, its overall aesthetic is clean.
Physical Deformation Examination
Upon detailed examination of the device’s outer casing:
- Casing: No breaks, deep cracks, or missing parts are observed. The corners are intact.
- Keypad: No tears or depressions were detected on the membrane surface.
- Screen: The LCD screen is in the off position. No deep scratches or cracks are visible on the screen glass or its protective plastic.
Mechanical and Connection Components
Upon examining the socket input located at the bottom of the device:
- The pin slots (female connector) in the socket input appear clean, and the pins are in place.
- The teeth and structure of the male socket end on the accessory (probe) appear intact, and no breaks are seen on the plastic locking tabs.
Electronic Components and Screen Analysis
The device is in the off position in the visuals. Therefore, visual analysis of the screen’s operating performance, presence of pixel errors, or software status cannot be performed. However, the 5 function buttons on the panel (Power, Alarm, Menu/Up, Light/Brightness, Down) constitute the standard controls of the electronic interface.
Condition of Accessories
The SpO2 probe (sensor) displayed with the device has been analyzed in detail:
- Type: Adult-type finger clip (clamp) probe.
- Color: Gray sensor head, beige/cream colored cable.
- Condition: The sensor’s clamp mechanism appears integrated externally. No visual breaks or crimps were detected in its cable, but the cable color appears slightly more beige toned compared to the device casing, which could be a natural color change over time.
Battery Status
This model is typically a portable device powered by batteries (AA or internal battery). Since the battery compartment cover or the back of the device is not shown in the visuals, no analysis could be made regarding whether batteries are present or the physical condition of the battery (leakage, swelling, etc.).
Label and Serial Number Information
The visuals only show the front and bottom of the device. Since technical labels, serial numbers (SN), manufacturing year, or REF codes are typically located on the rear of the device, this data could not be read from the available visuals and therefore could not be added to the report.
Existing Fault and Risk Assessment
During the examination of the visuals, no physical defect (broken casing, broken cable, missing button) that would prevent the device from operating was detected. However, the following points should be noted for potential evaluation:
- Since sensor cables can deform internally over time, the functionality of the probe should be tested (The outer sheath is intact in the visual).
- There is no screen image showing the device in operation; the device is off.
Summary
The Medlab NANOX 2 is a device that appears clean externally, with an intact casing and keypad, and completes the set with its accessory probe. There is no immediately apparent visual damage, and its cosmetic condition is good.
