Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 13.10.2025
KTMED Pulse Oximeter Analysis Report
Overview and Device Description
The device shown in the images consists of one KTMED brand pulse oximeter and one finger probe connected to the device. The product is a medical monitor used to measure blood oxygen saturation (SpO2) and pulse rate (Pulse bpm). In total, there are two product parts: one main unit and one sensor probe.
Condition and State Assessment
The overall condition of the device is assessed as used. Although the main unit’s casing generally appears to be in good condition, there is a noticeable yellowing, particularly on the finger probe and its cable. This indicates that the material has changed color over time or due to use. Slight dirt and stains have been observed on the device’s surface and the probe.
Physical and Mechanical Analysis
Upon examining the physical and mechanical components of the product, the following details were identified:
- Casing: No serious scratches, dents, or cracks were observed on the main casing of the device. However, there are small stains on the surface.
- Screen: The device’s screen is in an off state, and no scratches or damage are visible on it. Whether the screen is functional cannot be determined from the images.
- Keypad: The control buttons (power, alarm mute, up/down adjustment buttons) located on the front panel appear to be physically in place and undamaged.
- Probe and Cable: There is obvious yellowing on the finger probe and cable connected to the device. No breaks or crimping were detected at the points where the cable connects to the device and the probe.
- Side Attachment: On the left side of the device, there is a clamping screw mechanism, understood to be used for securing it in place. This mechanism appears sturdy.
Accessories and Label Information
Only the finger probe accessory, integrated with the device, is visible. No other accessories (power cable, user manual, etc.) are present in the images. There is a label on the probe cable, but specific information such as serial number, REF code, or lot number could not be determined as the handwriting on the label is not clearly legible.
Potential Risk Assessment
There is no clear evidence in the images, such as a broken part or an error message, indicating that the device is faulty. However, the yellowing on the probe and its cable suggests that the product has been used for a long time or might be an older model. This condition could be a sign of wear and tear that might affect cable and sensor performance in the future. No comment can be made on the current state of the device’s electronic components based on the images; its general mechanical condition appears sound.
