Secondhand Nellcor Bedside Console Type Pulse Oximeter

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 10.10.2025

Covidien Nellcor Bedside SpO2 Patient Monitor Analysis Report

Product Description and Intended Use

The product in the image is a bedside monitor. The phrase “Nellcor™ Bedside SpO2 Patient Monitoring System” on the device’s label indicates that the product is used for real-time monitoring of patients’ blood oxygen saturation (SpO2) and pulse rate. Such devices are typically used in hospitals, clinics, and home care settings. An SpO2 sensor and a connection cable for patient attachment to perform measurements are included with the device.

Brand and Model Information

The images clearly show that the device’s brand is Covidien and the product series is Nellcor. The device’s model is stated as “Bedside SpO2 Patient Monitoring System” on the top panel.

Set Contents and Quantity Information

The parts included in the set in the image are listed below:

• 1 Covidien Nellcor main monitor unit
• 1 SpO2 sensor and interconnecting cable

General Condition and Physical Deformities

The device is generally in used condition. Slight dirt and stains are observed on its surface, especially on the white plastic parts. A noticeable accumulation of dust and dirt is present around the device’s screen bezel and rotary selection knob. No cracks, breaks, or significant dents have been detected on the device’s casing or screen. No visible breakage or peeling is found on the cable and sensor.

Mechanical and Electronic Component Evaluation

The power, home, and alarm mute buttons on the device’s front panel are physically in place. The rotary selection knob is also present. However, the heavy soiling around this knob could potentially affect its mechanical functionality. Since the device’s screen is off, it cannot be determined from the image whether its electronic components are working or if there are any issues with the screen. The SpO2 sensor’s connection socket is attached to the device, and no physical damage is visible.

Accessories

Included with the device is one SpO2 sensor and its interconnecting cable. No other accessories such as the device’s power cable, user manual, or original box are present in the images.

Label and Technical Information

The quick reference guide label on the top part of the device contains the following information:

• Product Name: Nellcor™ Bedside SpO2 Patient Monitoring System
• Other Codes: The code “A7215-1 REV 03/2012” is located at the bottom right corner of the label. This code likely indicates the revision date and part number of the label.

Information such as the device’s serial number or lot number could not be found in the images.

Potential Risk Assessment

Although the device is in used general condition, it does not show significant physical damage. The most prominent potential risk is the accumulation of dirt around the rotary selection knob. This condition could prevent the knob from functioning properly or lead to intermittent contact over time. A professional inspection and thorough cleaning are recommended to fully ascertain the device’s functionality.