Secondhand Nellcor N-560 Console Type Pulse Oximeter

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 13.10.2025

Nellcor N-560 Pulse Oximeter Analysis Report

Overview and Device Identification

The device shown in the visuals is a Nellcor N-560 model pulse oximeter. The device is a medical monitor used to measure blood oxygen saturation (%SpO2) and pulse rate (C/min). The report is based on the visual analysis of this device and its accompanying accessories.

Brand and Model Information

Upon detailed examination of the visuals, the Nellcor brand and N-560 model code are clearly legible on the device’s front panel. Based on this information, the device’s brand has been definitively identified as Nellcor and its model as N-560.

Quantity Information and Accessories

The following parts are present in the visuals in total:

• 1 Nellcor N-560 Pulse Oximeter main unit
• 1 SpO2 (finger probe) sensor and cable
• 1 power cable

General Condition and State

The general condition of the device is assessed as lightly used and well-maintained. No significant discoloration or yellowing has been observed on its white casing. Both the main unit and its accessories have a clean appearance, indicating regular maintenance.

Physical Assessment

Upon careful examination of the device’s casing and exterior surface, no cracks, dents, or breaks that would impede its use have been detected. There are no prominent scratches on its surface. In the upper left corner of the device, there is one blue “Nellcor” label and another small label next to it, which appears to be a calibration label. The socket inputs on the device’s rear panel and front panel appear physically sound.

Mechanical and Electronic Components

The control buttons on the device’s front panel are physically in place, and no damage is visible. The power input, fan grille, and data port on the rear of the device are visually problem-free. It is understood that the device is in working condition from the active numbers and illuminated indicators on its screen. This indicates that the basic functions of the device’s electronic components are operational.

Screen Analysis and Observations

The device’s digital screen is active, and no pixel loss has been observed. In one of the visuals, the screen is seen displaying 8.8.8. and 8.8.8. digits, showing all segments during the startup test, which confirms the screen is functioning properly. In other visuals, the following values and conditions have been observed:

• %SpO2 87.8 and C/min 560: These values might indicate a moment of measurement.
• %SpO2 UEA and C/min 1.68L: The “UEA” indication on the screen is generally a warning or error code. This situation may indicate that the sensor is not properly attached or there is a connection issue.

Potential Malfunction Risk

The general condition of the device is quite good, and no obvious risks such as significant wear, rust, or crushed cables have been observed. The “UEA” warning momentarily visible on the screen might indicate a potential sensor detection or connection problem, but it cannot be determined from the visuals whether this is a permanent malfunction or a momentary user error. Other than this, the general state of the device suggests it does not carry a potential malfunction risk.