Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 13.03.2026
Report code: 1773399523
Rimec Fisiotek 2000 E CPM Device Analysis Report
Device Identification and Areas of Use
The product in the images is a rehabilitation device designed for continuous passive motion (CPM) therapy of lower extremity (knee and hip) joints. It is suitable for use in orthopedics and physical therapy to restore joint range of motion in patients after surgery or trauma. The device has an adaptable structure, allowing it to be adjusted for adult patients with different leg lengths thanks to its adjustable metal arms and straps.
Brand and Model Information
Upon examining the inscriptions on the device’s control panel, its brand has been clearly identified as Rimec, and its model as Fisiotek 2000 E.
General Condition and Originality
The device is in used condition, but its overall condition is quite good. Considering the manufacturing quality, materials used, the CE mark on the body, and the standard medical device design, the product is assessed as original. A total of 1 main device is present in the images.
Physical and Mechanical Component Analysis
- Body: The gray main casing has yellow stripes. There are no breaks, dents, or cracks on the casing, apart from minor superficial marks due to use.
- Moving Parts: The leg support units, metal arms, black adjustment screws (knobs), and sliding rail system are visually intact. No rust or deformation has been observed.
- Support Pads: Black leg and foot support pads with hook-and-loop fastening straps are present. There is no excessive wear or tear on the pads and straps.
Electronic Components and Screen Analysis
A black control panel is located on the front of the device. A 4-digit digital display is present on the panel. The images show the device’s screen is operational and displaying the numbers 8888. The panel includes START, STOP, SPEED, FORCE, PAUSE, TIMER buttons, along with directional and plus/minus adjustment buttons. There is no physical fading or depression on the button array. A black, spiral (helical) connection cable is located between the main body and the movable mechanism, and its outer insulation appears intact.
Label and Warning Information
- Brand Label: The inscription RIMEC Fisiotek 2000 E is located on the upper left corner of the control panel.
- Warning Label: A yellow-backed, black exclamation mark triangular warning label, indicating caution, is present on the sliding rail.
- Side Label: A silver-colored information label bearing the CE mark is located on the side of the device. However, due to image resolution, specific technical texts such as serial number, lot number, REF code, or year of manufacture on this label are unreadable.
Potential Malfunction Risk
The device’s overall condition is good, and there is no evidence of an existing malfunction (e.g., broken part, severed cable) in the images. Based on visual data, it is assessed that mechanical friction might occur over time due to dust accumulation in the open structure of the movable rail, and the spiral connection cable could wear out in the future due to continuous flexing. The physical integrity of the device has been maintained.
