Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 17.11.2025
Welch Allyn NIBP Module Analysis Report
General Assessment and Product Description
The visuals show a total of 2 units of medical device modules belonging to the Welch Allyn brand. The “NIBP” inscription on the devices indicates that these modules are used for non-invasive blood pressure measurement. These modules are components that typically operate by being integrated into larger bedside patient monitor systems. The labels, workmanship quality, and clear prints in the visuals strongly support that the products are original Welch Allyn components. The devices appear to be in new or very lightly used physical condition.
Physical Condition and Deformation Analysis
The overall condition of both modules is extremely good. There are no visible deformations such as scratches, cracks, discoloration, or stains on their outer casings. The internal parts, visible through the transparent plastic covers, also have a clean and dust-free appearance. There are no signs of wear on the light blue and white plastic components on the external surface of the devices.
Electronic and Mechanical Component Examination
The electronic circuit boards and components visible under the transparent covers of the modules are in a clean and undamaged condition. No burns, corrosion, or abnormalities are observed in the solder points or circuit paths. The small white hoses and the motors that operate the pumps located inside are properly mounted in their places and appear physically sound. The NIBP connector sockets on the front face of the devices are also clean and in excellent condition, with no bent or damaged pins.
Label Information and Identification Codes
The label information for the two modules in the visuals is different, and the details are listed below. In both modules, the manufacturer information is stated as “Welch Allyn, Inc.” along with its address.
- 1st Module (Left)
- Brand: Welch Allyn
- REF Code: 412574
- Serial Number (SN): T79044203S (Additionally, there is another serial number label inside)
- 2nd Module (Right)
- Brand: Welch Allyn
- REF Code: 405572
- Serial Number (SN): 00115110TJ
- Place of Manufacture: Assembled in Mexico
Both product labels include the phrase “Passed Final Quality Assurance Testing” indicating that they have passed quality control tests, and the CE 0297 conformity mark.
Accessories and Compatibility
No accessories (connection cable, blood pressure cuff, etc.) other than the modules themselves are present in the visuals. These products are NIBP measurement modules compatible with specific Welch Allyn patient monitor models. No documents, invoices, or warranty certificates are included in the visuals.
Potential Risk Assessment
During the visual inspection, no negative conditions were detected that could prevent the devices from operating or cause a malfunction in the near future. Since the products are in perfect physical condition, no potential risk of malfunction is observed. Both their internal and external structures indicate that they have been properly maintained.
