Secondhand Dewert Okin Okimat IPSe Patient Bed Motor

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 04.08.2025

OKIN Dymat 2SL Adjustable Bed Motor Analysis Report

Overview and Product Identification

The images show a dual-motor actuator designed for adjustable bed mechanisms and a wired hand control belonging to this actuator. The product is a motor system used to move the head and foot sections of the bed mattress. The device’s workmanship and the labels on it give the impression that it is an original product.

• Identified Device: Dual Motor Bed Actuator
• Quantity Information: A total of 2 product pieces are visible, consisting of 1 motor unit and 1 wired hand control.

Brand and Model Information

The brand and model of the product in the image have been clearly identified thanks to the device’s main body and the labels on it.

• Brand: OKIN
• Model: Dymat 2SL

Physical State and Condition

The product is in generally good condition and appears to have been used. There are no significant cracks, fractures, or dents on the device’s black plastic casing. However, there are minor scratches and some dust on the surface due to use. The buttons and icons on the remote control are clear and show no signs of wear. No peeling or crushing has been observed on the outer insulation of the cables. In terms of its overall appearance, it is a well-maintained device.

Technical Details and Label Information

The manufacturer’s label on the back of the device contains important technical information and production details. The information on this label is listed below.

• Production Date: Prod. Datum: 2013-05
• Part Number (Teile-Nr): 72738
• Barcode Number: 2121300057
• Input Voltage: AC 230V / 50/60 Hz / 0.7A
• Output Voltage: DC 24V
• Operating Principle: Interm. Betrieb: KB 2 Min./18 Min. (Intermittent operation: should be operated for 2 minutes and rested for 18 minutes)
• Maximum Force: 2 x 4500 N
• Protection Class: IP20
• Certifications: CE and TÜV SÜD logos are present.

Accessories and Connection Ports

The product comes with its essential accessories that ensure its functionality. There is an integrated power cord on the main unit and a wired hand control. The control is connected to the device with a coiled cable.

Two socket inputs are visible on the device. One of them is the port where the hand control with the 5-pin DIN connector is plugged in. The other is a vacant 7-pin socket, likely designed for an additional accessory or a synchronization cable. All connectors and sockets appear clean and undamaged.

Potential Risk Assessment

Although the device was manufactured in 2013, its physical condition as observed in the images is quite good. No visible wear, rust, or damage (such as crushed cables, bent connectors, etc.) has been detected in the mechanical and electronic components. Therefore, based on its current state, no significant risk of malfunction is observed. It is predicted that the product can be used without issues, provided that the specified operating principles (2 minutes of operation / 18 minutes of rest) are followed.