Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 21.04.2026
Report code: 1776763175
Medical Module Analysis Report
Device Identification
The image shows a single medical module in a vertical, plug-and-play form, which appears to belong to an anesthesia machine or patient monitoring system.
Brand and Model
There is no readable information regarding the manufacturer brand or a specific model name on the module. Therefore, brand and model identification could not be performed.
Usage Areas
On the front face of the module, there is a P3 label and a red multi-pin socket input. Next to this socket, standard medical symbols representing invasive blood pressure (IBP) measurement are present. Based on this data, it has been determined that the module is used to monitor patients’ invasive blood pressure parameters. The module functions by being plugged into a compatible main medical device system.
Quantity Information
There is 1 medical module in the image.
General Condition and Physical Deformation
The outer casing of the module is made of white plastic. Slight soiling and superficial stains due to use are visible on the casing. No breaks, cracks, or deep impact marks have been observed on the plastic components. The general condition of the device is used but its integrity is preserved.
Mechanical and Electronic Components
The red socket input on the front of the module and the pins inside appear to be intact. No mechanical damage has been detected around the socket or at the joints of the module. The connection connectors on the back of the module could not be examined as they are not visible in the image. There is no visual data regarding the status of the internal electronic components.
Accessories and Sockets
No cables, sensors, or additional accessories are provided with the module. There is 1 red-colored, multi-pin female socket input on the front of the module.
Label and Marking Information
The following information and symbols are present on the front of the module:
- At the top, there is a button or label with Zero P3 written in white letters inside a blue circle.
- The text P3 is located just above the socket input.
- To the left of the socket, there are standard medical symbols representing invasive pressure measurement and defibrillation-proof (CF type) patient connection.
- The code M1026118 EN is read vertically at the bottom of the module.
- The letters E-P are located in the bottom right corner.
Potential Failure Risk
In the visual analysis, no physical damage such as severe wear, broken parts, or corrosion has been detected on the module. The external condition of the device is in good state.
