Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 30.05.2026
Report code: 1780099628
XP V1647T Power Supply Board Analysis Report
Device Identification and Brand Information
The images show a power supply and timing unit board suitable for use in medical devices. This board is a green printed circuit board (PCB) where electronic components are assembled.
- Brand: XP
- Model/Part Number: V1647T
The “XP” inscription on the board and the “XP V1647T” code found on a component label indicate that the product belongs to the XP brand and that V1647T is the model or part number of this power supply module. Furthermore, the text “POWER SUPPLY TIMING (PSU) R0025” on the board specifies that the device is a power supply and timing unit.
Authenticity Assessment
The product possesses professional manufacturing quality. The solder points are clean and orderly. The components are properly placed. The labels are clear and legible. These details suggest that the board is an original production.
Areas of Use
This power supply board is designed to be used as an internal component in various medical devices. It performs essential functions such as providing regulated power and managing timing signals. It can serve as an integrated part in fields such as hospital equipment, diagnostic devices, patient monitors, or other electronic-based medical systems.
Quantity Information
There is one power supply board in the images. The connectors and other components integrated onto the board are not counted as separate accessories.
General Condition and Physical Deformation
The general condition of the device appears to be good. No significant scratches, dents, cracks, or discoloration have been detected on the board. No accumulation of dirt or dust has been observed on the surface. The components are intact and in place.
Mechanical and Electronic Components
There are no visible issues with the mechanical components, such as the yellow heatsink block, or the blue and black connectors. The electronic components (capacitors, resistors, integrated circuits, coils) appear to be intact. There are no signs of disconnection or oxidation in the solder joints.
Accessories
There are no external boxes, cables, or other accessories belonging to the device in the images. The board features socket inputs that appear to be two USB-A type ports and one barrel jack type power input. Additionally, a blue multi-pin connector and a black rectangular connector are located on the board.
Battery Status
There is no internal or external battery belonging to the device in the images.
Label Information
The following information has been identified on the product and its components:
- 191004229: This number is located on a label on a component and may be the serial number or production batch code of the product.
- XP V1647T: This code indicates the brand and model/part number of the product. It refers to the XP brand and the V1647T model.
- POWER SUPPLY TIMING (PSU) R0025: This expression written on the board indicates that the board is a power supply and timing unit, and the “R0025” code may be a revision or project number.
- ATTENTION ~100-240V: This warning, located on a red label on a black component, states that the device operates with alternating current (AC) in the 100 to 240 Volt range. This means it can be used within a wide voltage range.
Screen Analysis
There is no screen on the device. Therefore, a screen analysis could not be performed.
Dimensions and Compatibility
There is no clear measurement information regarding the physical dimensions of the product in the images. However, as it is a printed circuit board, it can be assumed that it is sized to fit the internal volume of the medical device into which it will be integrated. The connector structures of the product are designed to be compatible with a specific device or system.
Production Year
The “191004229” number on a component label offers a clue regarding the production year. If this number is assumed to be a date code in “YYMMDD” or “YYYYMMDD” format, it can be interpreted that the product may have been manufactured in 2019.
Documents
There are no documents such as invoices, warranty certificates, or user manuals belonging to the device in the images.
Usage Duration
No information regarding usage hours or total operating time has been detected on the device or its labels.
Existing Faults
There is no clear evidence of faults such as broken parts, error messages, disconnected cables, or missing components in the images. The general appearance of the board is intact.
Potential Fault Risk
No conditions that could pose a potential fault risk, such as severe wear, rust, or cable crushing, have been observed on the board. The condition of the device is good.
