Secondhand Respirox RHB-10 Tube Type Air Mattress Motor

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 04.01.2026

RespiroX Air Mattress Pump Analysis Report

Device Identification

The product examined in the visuals is an air mattress pump (air motor) designed for medical air mattress systems. The device is the main control unit used to inflate air mattresses and provide air circulation, which are used to prevent or treat pressure ulcers (decubitus). It is not a bed frame or mattress, but only the motor unit that inflates these mattresses.

Brand and Model

As a result of detailed examination, the brand of the product has been definitively identified as RespiroX. This information is clearly written on the front face and top label of the device with a distinctive, characteristic blue logo and typography. A specific alphanumeric model code (e.g., SX-200) is not legible from the angles in the visuals; however, its visual design and hardware belong to the standard RespiroX air mattress motor series. No contract manufacturing or third-party labels were found on the product other than the original branding.

Originality

The print quality of the RespiroX logo on the device, its color tones, and the plastic molding workmanship of the device (case joints, button quality) indicate that the product is an original RespiroX production. The clarity of the Turkish instructions on the labels and the presence of the CE mark support its originality.

Areas of Use and Compatibility

This device is used to pump air into air mattress systems, which are utilized to regulate blood circulation and prevent bedsores in patients with limited mobility who are continuously bedridden. The dual air outlet ports visible on the left side indicate that the product is compatible with alternating pressure mattress models that sequentially inflate and deflate air cells. It is suitable for use in home care patients, nursing homes, and hospital environments.

Quantity Information

The visuals show 1 unit of the air mattress pump.

General Condition and Physical State

The external cosmetic condition of the device appears quite clean and good. There is no noticeable yellowing, heavy soiling, or wear on the product’s white and gray plastic casing. The product can be evaluated as being in “lightly used” or “near-new” condition.

Physical Deformity Inspection

The visual inspection revealed no cracks, breaks, or dents on the device’s outer casing. The corners and joints are intact. There might be very microscopic superficial marks on the surface due to normal use or storage, but no distinct deep scratches were identified from the photographs.

Mechanical and Electronic Components

Pressure Adjustment Dial: The gradations (for min/max pressure setting) on the gray rotary dial located on the front panel are clear and legible. The dial appears sturdy.
On/Off Switch: The green, presumably illuminated, “ON/OFF” switch is physically intact and properly seated in its housing.
Air Outlets: On the left side panel of the device, there are two black air outlet ports where air hoses are connected. No breakage or blockage was visually detected in these ports.
Feet: Black rubber feet, designed to prevent vibration, are visible at the bottom of the device.

Battery and Power Status

The device operates with mains electricity. There is no indication in the visuals that it has an internal battery (typically, motors of this type are plugged directly into an outlet). A black electrical power cable exits from the right side of the device. The point where the cable connects to the body is secure, but since the entire length of the cable and the plug end are not visible in the visuals, no comment can be made regarding potential crushing.

Accessories

The visuals do not show the air hoses and inflatable mattress (pad) that should be supplied with the device. Only the motor unit and its connected power cable are visible. Air hoses and a mattress must be procured separately to use the device.

Label Information

The large label on the top of the device contains the following information:

• Usage Instructions: Turkish steps such as “Cool the air mattress…”, “Connect the power cable to the air pump…”, “Connect the bed’s air hoses to the pump…” are present.
• Video Guide: A QR Code is present with the phrase “Scan for Installation and Usage Video”.
• Symbols: The CE (Conformité Européenne) certification mark is visible.

Potential Malfunction Risk

The visuals do not show any significant risk factors that would prevent the device from operating, such as burn marks, rust, cable breaks, or damage to the outer casing. The device’s condition is reassuring. However, it should be noted that the device is an electric motor, and whether it produces sound/vibration during operation cannot be tested by visuals alone.

Existing Malfunction

Based on visual evidence, there is no malfunction, error light, or missing parts (on the casing) on the device. Buttons and input/output ports are in place.