Secondhand Elektro-mag M 6040 P 120 Liter Hot Air Sterilizer

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 03.09.2025

Elektro-Mag M 6040 P Oven Analysis Report

Overview and Device Description

The product shown in the images is an oven or incubator intended for laboratory and industrial use. According to the information on the device’s front panel, it has a microprocessor-controlled and programmable structure. A total of one main unit and its internal accessories have been analyzed. The primary function of the product is to maintain, heat, or dry materials placed inside it at specific temperatures.

Brand and Model Information

The brand of the device is clearly read as Elektro-Mag on the front panel. The model information is also stated as M 6040 P on the same panel. Additionally, the product is described as “MICROPROCESSOR CONTROLLED PID / PROGRAMMABLE OVEN” and “MICROPROCESSOR CONTROLLED PROGRAMMABLE INCUBATOR / OVEN”.

Condition and Status Assessment

The general condition of the product is assessed as used. Signs of use are present on both its outer casing and internal structure, but its overall condition suggests a functional appearance.

Physical Deformations

• Outer Casing: The white and gray outer casing of the device generally shows slight scratches, minor scuff marks, and some discoloration in places.
• Top Surface: Around a white plastic part located in the middle of the top panel, yellowish and rust-like stains are present. This indicates a deformation in the area.
• Internal Structure: The device’s inner chamber and shelves are made of metal. No significant rust, dents, or serious deformations are observed on the inner surface. The shelves are in good condition.
• Control Panel: The gray plastic surface of the control panel shows slight wear due to use.

Mechanical and Electronic Components

Upon visual inspection of the mechanical and electronic components, the following conditions have been observed:

• Mechanical Parts: The device’s door, door handle, and locking mechanism are in place. One key is attached to the lock. The internal shelf insertion channels and the shelves themselves appear to be without issues.
• Electronic Parts: The control panel features a digital display, various indicator lights (ALARM, HEATING, SAFETY), adjustment knobs, two rotary thermostats (Safety thermostat and Damper position), and a power switch (ON/OFF). With the power switch in the “ON” position, all segments of the digital display are observed to light up, which typically indicates the device is in test mode or during startup.

Accessories and Additional Parts

The following accessories and additional parts are observed with the device:

• Metal Shelf: The device contains 2 perforated metal shelves.
• Key: One key is attached to the device’s bottom lock.
• Document: A paper containing user instructions is affixed to the device’s cover.

Label Information

Information obtained from the labels and markings on the device in the images includes:

• Brand: Elektro-Mag
• Model: M 6040 P
• Certification: TSE (Turkish Standards Institution) logo
• Warning Label: A yellow label with a high temperature and hot surface warning is present.

Information such as the device’s serial number, manufacturing year, or other detailed REF codes could not be clearly read from the images.

Malfunction Status and Potential Risks

In the images, no broken parts, cracks, or obvious indications of a malfunction that would directly impede the device’s operation were detected. The illumination of lights on the control panel indicates that the device is receiving power. However, the white plastic part on the top of the device and the stains around it suggest that this area might have been exposed to liquid or overheated previously. Whether this situation indicates an existing or potential malfunction cannot be definitively determined solely by looking at the images. Nevertheless, the good condition of the device’s interior and overall mechanical structure suggests a high potential for it to perform its basic functions.