Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI agent. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 13.10.2026
Report code: 1791901485
STERIMAG S 1050 Sterilizer Analysis Report
Device Description and Intended Use
The examined device is a dry heat sterilizer used in medical and laboratory environments. The device is used to perform sterilization via dry heat for the purpose of decontaminating heat-resistant surgical instruments, glassware, and laboratory equipment. Brand and model information in white and yellow colors on a blue background is located on the front left panel of the device.
Brand and Model Information
According to the inscriptions on the label on the front panel of the device, the brand is determined as STERIMAG and the model code as S 1050. In the upper left section, there is the elektro-mag inscription in lowercase letters and a digital temperature control unit. The word STERILIZER is present below the model name.
General Status and Condition
The general condition of the device is moderate and it bears signs of use. The outer metal casing is white, and the front side features a control panel and a mechanical timer knob. The door of the device is in the open position, and the inner chamber is accessible.
Physical Deformation
There is slight dusting and signs of use on the outer metal body and around the front panel of the device. No significant dents or deep cracks were detected on the casing.
Mechanical Components
There is a manual timer knob (TIMER (MIN.)) with a rotating mechanism on the front panel. On the right side of the door, there are metal hinges and a locking latch used to secure the door. Inside, there are metal rails with a perforated structure that carry the shelves and movable wire shelves.
Electronic Components
There is a temperature control unit (TEMPERATURE CONTROLLER) with a digital display in the upper left corner of the front panel. On this unit, there is an OUT indicator showing the operating status, as well as up/down arrow keys and a set button. The panel also features a green main power switch (POWER) and an orange HEATER ON lamp indicating the heating status.
Accessories
There are three metal shelves with circular holes positioned inside the device. The black gasket sealing the door perimeter is in place. Under the device, there is a metal-legged support stand. No external cables, adapters, boxes, or additional documents are visible in the images.
Battery Status
The device does not have an internal or external battery system; it operates directly on mains electricity.
Label and Inscription Inventory
The following inscriptions are readable on the blue area of the front panel: STERIMAG in the upper section, elektro-mag and TEMPERATURE CONTROLLER on the top left, OUT and SET on the digital display, and S 1050 and STERILIZER in the middle. Around the timer dial, there are minute values from 0 to 120 and the TIMER (MIN.) inscription. At the bottom, there is the HEATER ON inscription and the POWER inscription below the on/off button. Additionally, a yellow warning symbol and a label reading SICAK YÜZEY (HOT SURFACE) are affixed to the lower right cover of the device.
Display Analysis
The digital temperature control display on the front panel is not active and is in the off position.
Dimensions and Compatibility
The net dimensions or capacity value of the device are not written in the images; however, it is in the size of a standard desktop or under-counter laboratory-type sterilizer.
Year of Manufacture
There is no direct indication of the year of manufacture on the labels and panels in the images. The design and control panel structure of the device exhibit the characteristics of a classic laboratory-type device from a past period.
Documents
No invoices, warranty certificates, user manuals, or any printed documents are present in the images.
Usage Duration
There is no digital counter or data on the device showing the total operating hours or usage duration.
Existing Faults
No broken parts, severed cables, or clear error messages were observed during the visual inspection; however, it could not be visually verified whether the electrical and heating functions of the device are operational.
Potential Fault Risk
There are slight signs of use on the inner shelves and metal surfaces; apart from this, no concrete risks such as visible rust or cable crushing were detected.
Authenticity
The placement of the brand and model logos on the front panel and the industrial design elements indicate that the device is an original STERIMAG production.
Quantity Information
The images show 1 main sterilizer device, 3 internal shelves attached to the device, and 1 support stand.
Areas of Use
This device is used in hospitals, clinics, dental offices, and laboratories for the purpose of dry heat sterilization of glassware, surgical instruments, and heat-resistant equipment.
