Secondhand Bıçakçılar Suction Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 24.11.2025

Biçakcılar Surgical Aspirator Analysis Report

Brand and Model Identification

Through a detailed examination of the visuals, the brand was definitively identified as BIÇAKCILAR due to the black typography on the prominent yellow label located on the device’s front panel. The same brand logo is also present within the vacuum gauge (manometer) on the front face of the product. The overall design and components of the device indicate that it is a classic type of surgical aspirator (vacuum device). A label bearing the inscription “UNITEST” is visible in the upper right corner of the front panel; this label is likely a calibration or technical service control tag.

Physical Condition and Cosmetic Examination

The device’s outer casing consists of beige/cream-colored metal or hardened material. The cosmetic condition of the product clearly reflects heavy use and age-related wear and tear. Widespread gray stains, dirt accumulation, and superficial abrasions were particularly observed on the upper surface of the device. Local paint peeling and gaps at the casing’s joint points are noticeable. The device is not in “New” or “Lightly Used” status; it has a significantly old and fatigued appearance.

Technical Hardware and Component Analysis

• Manometer: A circular analog manometer displaying vacuum pressure is located on the front panel. The gauge is scaled between 0 and 760 mmHg (millimeters of mercury).
• Control Knob: A black rotary type (toggle) switch (On/Off) for turning the device on and off is located in the lower left part of the manometer.
• Vacuum Inlet: A hose inlet port marked in blue is present on the front face.
• Carrying Handle: A cream-colored plastic carrying handle is positioned on the upper part of the device to ensure portability.
• Rear Casing Joint: Areas where the material has lifted or does not fit properly at the joint points between the top cover and the main body are visible in the image.

Accessory and Collection Unit Condition

A liquid collection jar is located on the right side of the device. This jar is made of glass material and has a metal lid mechanism. Inside the jar, hoses connected to the mechanism used for the aspiration process are present. This system is integrated into the device with transparent plastic hoses. However, the hoses’ color having turned from transparent to yellow indicates that the material has oxidized over time and is old. Additionally, there is a white plastic receptacle where the jar sits.

Custom Modifications and Possible Repairs

On the upper right side of the device, there is a structure wrapped with yellow electrical tape or a similar material, which is clearly not part of the product’s original design. Immediately next to this section, there is a transparent dome-shaped part (likely a filter or safety valve cover). The yellow taped section indicates an unprofessional repair or part stabilization and is the most prominent detail that compromises the device’s originality.

Transport Stand and Environmental Equipment

The aspirator is placed not directly on the floor, but on a metal-profiled wheeled transport trolley that appears compatible with it. This stand (trolley) has four swivel wheels to ensure the device’s mobility. Although there is a paper/mat containing drug advertisements on the underside of the stand, this stand has been considered a complementary element for the device’s use. The paint on the stand has peeled in places and shows signs of rust. On one of the stand’s legs, an extension of a drainage or waste hose, ending in a white plastic cup, is visible.

Potential Risks and Warnings

In light of the data obtained from the visuals, the following points are noteworthy:

• The yellow taped modification on the upper part of the device may indicate a possible air leak repair or a broken part; this situation could affect vacuum performance.
• The yellowing of the hoses implies that they may have lost their flexibility and become prone to cracking; this poses a hygiene and sealing risk.
• The intense contamination on the outer surface of the device indicates that it falls outside sterilization standards and requires detailed cleaning/maintenance.
• The functionality of the manometer and motor cannot be tested via visuals, but the physical wear suggests that the device may require mechanical maintenance.