Secondhand CA-MI Hospivac 350 Basic Suction Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 07.09.2025

Ca-mi Hospivac Medical Aspirator Analysis Report

Overview and Device Identification

The device shown in the images is a wheeled medical aspirator used for aspirating (suctioning) bodily fluids in medical environments. The product’s brand has been clearly identified as Ca-mi, and its model as Hospivac. A “MADE IN ITALY” label is present on the device’s front panel, indicating that the product’s place of manufacture is Italy.

Quantity Information and Accessories

The scope of the examination includes a total of 1 medical aspirator and its attached accessories. The parts mounted on the device and ready for use are as follows:

• Collection Jars: There are 2 transparent collection jars on the device. Measurement lines are present on the jars.
• Hoses: Transparent and black hoses connect the jars to each other and to the device.

The images do not show a power cable or any other accessory required for the device to operate.

Physical Condition and Deformation

The device is generally observed to be in a used condition. There are occasional yellowing and discoloration on the main white casing. This condition is more pronounced on the plastic parts, especially on the top and sides. The jars and hoses have a dull and dirty appearance due to use. No significant cracks, fractures, or dents have been detected anywhere on the device.

Mechanical and Technical Components

The device’s general mechanical condition appears functional. Its wheels are intact and in place. The front panel features an analog vacuum gauge (manometer) and an on/off switch.

• Vacuum Gauge: The gauge displays pressure units as “kPa” and “bar.” An inscription indicating compliance with the “EN ISO 10079-1” standard is also visible.
• Control Panel: The panel has an on/off button with a green power indicator light.
• Storage Compartment: A compartment designed to store accessories or cables is located at the back of the device.

Label and Code Information

Information legible from the labels on the device is limited. A white label is located on the back, but its content cannot be read from the images. Therefore, detailed information such as serial number, lot number, or REF code could not be obtained.

Potential Malfunction Risk

No direct malfunction or damage to the device has been detected in the images. However, considering the device’s used condition, the yellowing of plastic components, and the current state of the jars and hoses, it is crucial for the device to undergo a professional technical inspection and for all its parts to be sterilized before being put into use. Parts such as hoses, which are disposable or require regular replacement, may need to be renewed.