Secondhand Pulsemed 9E-A Suction Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 05.09.2025

Sputum Aspirator Device Analysis Report

Overview and Product Description

The product shown in the images is a medical sputum aspiration (vacuum) device. The primary function of the device is to clear accumulated secretions and phlegm from the respiratory tract, allowing the patient to breathe more easily. The set includes a main unit, a collection container, connection hoses, and an instruction manual. The product has a portable design and features a carrying handle on its upper part.

A total of 1 unit of the main aspirator device and its accessories have been examined. The components included with the product are listed below:

• 1 main unit
• 1 collection container with 1000 mL capacity (Phlegm Suction)
• 1 set of connection hoses and filter
• 1 Turkish “USER MANUAL”
• 1 foam packaging base
• An accessory, likely an aspiration catheter, bagged inside the collection container

Condition and Status Assessment

The general condition of the device is assessed as slightly used or near new. The presence of the packaging foam and the user manual suggests that the product has been used very little or not at all. Although there is no visibly serious damage on the white plastic casing of the main unit, slight yellowing and superficial scratches are present. A visual inspection revealed that the green “POWER” light on the device was illuminated, indicating that the device is receiving power and operating.

Physical and Mechanical Analysis

No significant defect was detected during the examinations of the physical and mechanical components of the device.

• Casing: The white and turquoise plastic casing of the device shows no breaks, cracks, or dents. However, a slight discoloration (yellowing), thought to have occurred over time, is noticeable.
• Control Panel: The front panel features a rotary knob (Pressure Regulator) for adjusting vacuum power and an on/off switch. There are slight liftings and air bubbles around the edges of the blue label protector on the panel.
• Gauge: The glass of the analog pressure (vacuum) gauge is intact, and its needle is at the “0” position when the device is not operating. The gauge measures in MPa units.
• Hoses: A noticeable yellowing has been observed in the transparent hoses of the device. This condition may indicate material aging or prolonged exposure to light. No tears or holes are visible in the hoses.

Accessories and Package Contents

Upon examination of the accessories included with the device, the collection container is observed to be transparent and clean. The container has measurement lines between 100 mL and 1000 mL. Although the exact contents of the bagged accessory inside the container are not fully discernible, it is generally believed to be a disposable aspiration catheter, typically provided with such devices. The bottom foam, understood to be part of the device’s original packaging, is present, but the complete box is not visible.

Technical Details and Label Information

No clear and readable information regarding the product’s brand and model could be found in the images. As a result of examinations of the labels on the device, no serial number, REF code, or lot number was detected. The only legible label information is “Phlegm Suction 1000mL” on the collection container. Functional inscriptions such as “PRESSURE REGULATOR”, “High Value Low Flow”, “ON”, and “OFF” are present on the control panel.

Potential Risk Assessment

Based on visual analyses, no significant malfunction or immediate risk has been observed in the device. The device’s condition is generally good. The only potential risk to note is the noticeable yellowing of the connection hoses. This yellowing may be an indication that the plastic is losing its properties over time and could increase the risk of the hoses hardening, cracking, or breaking in the future. However, currently, the hoses appear functional.