Secondhand Pulsemed 9E-B Suction Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 22.12.2025

Pulsemed Medical Aspirator (Suction Device) Analysis Report

Device Identification and Description

The product in the examined images is a portable aspiration device (surgical aspirator) used for medical purposes. Due to its integrated carrying handle and compact structure, this device is designed as a portable model suitable for use in both hospital settings and home care processes. The product consists of a main body unit and a collection jar integrated into this unit.

Brand and Model Information

Upon detailed examination of the writings and logos on the product, the following findings were made:

• Brand: The brand name Pulsemed is clearly visible on the lower right corner of the product.
• Model/Type: On the yellow label on the front panel of the device, the phrase High Vacuum Low Flow Suction, indicating the product’s technical class and type, is legible. No specific alphanumeric model code (e.g., 7E-A) other than this is visible in the images; therefore, the device has been identified by this technical description and brand on its front face.

Applications

This Pulsemed branded aspirator is used for the purpose of removing mucus, blood, or other liquid secretions from the airways by means of vacuum. Thanks to its portable nature, it is suitable for use in the care of bedridden patients at home, in emergency vehicles, or during minor surgical interventions. It is a critical medical device, especially for opening the airways of patients experiencing respiratory distress.

General Condition and Physical State

Based on the images, the condition analysis of the device is as follows:

• Casing: The device’s white hard plastic outer casing appears clean. No noticeable deep cracks, breaks, or major deformations have been detected. The yellow bottom strip and the front control panel are in good condition.
• Color and Surface: Although there may be slight dulling on the plastic surfaces due to use, no significant discoloration or yellowing (sun damage) is apparent.

Control Panel and Mechanical Components

The control elements and their functions located on the front face of the device are as follows:

• Manometer: On the left side, there is a circular, needle-type vacuum gauge (manometer). Its dial is clean, and no cracks are visible on its glass.
• Vacuum Adjustment Knob: Below the “PRESSURE REGULATOR” label, there is a white rotary knob (potentiometer). This knob is used to adjust the vacuum intensity and appears physically intact.
• On/Off Switch: Under the “RUN” heading, there is a green illuminated switch. Although there are slight signs of wear on the switch’s plastic cover, its integrity is not compromised.
• LED Indicators: The panel features two LED indicator locations: “CHARGING” (Charging) and “REFILL” (This might be a refill/maintenance warning, but typically indicates battery status).

Accessories and Collection Jar

A cylindrical collection jar made of transparent plastic is located on the unit. The jar has a lid, and two hose inlet nozzles are visible on the lid. One of these nozzles is for the patient hose, and the other is for the vacuum hose inlet. No cracks have been observed on the inside or outside surface of the jar; the volume indicator level lines are faintly discernible.

Battery and Power Status

The CHARGING (Charging) LED indicator on the front panel indicates that this device has an internal battery (accumulator) and is equipped to operate wirelessly (without mains power). Additionally, a power input (socket) is visible on the side of the device. This feature confirms that the device is fully portable.

Missing Parts and Accessories

The missing components identified during the analysis are as follows:

• Hoses: The aspiration hose to be used between the device and the patient, and the connecting hose between the device and the jar are not present in the images.
• Filter: The “bacterial filter,” typically installed between hoses to protect the device’s motor, is not visible in the image.
• Aspiration Catheter: The sterile catheters required for patient application are not present.
• Charging Cable: Although a black cable end is partially visible on the right side of the second image, the entire cable or its adapter cannot be clearly discerned.

Quantity Information

The images show 1 (one) main device and 1 (one) collection jar attached to the device.

Conclusion and Evaluation

The Pulsemed branded aspiration device gives the impression of being in good condition and well-maintained cosmetically. The control panel is clean and legible. Being a model with an internal battery is advantageous for portability. However, for the device to be ready for use, consumables such as hose sets, bacterial filters, and aspiration catheters need to be acquired. There is no visual evidence (e.g., crack, error warning, burn mark) of a mechanical or electronic malfunction.